EDAN iSE-301 User Manual - page 39

SE-301 Series Electrocardiograph User Manual                                        Settings 

- 33 - 

5.  Make sure the type of USB printer connected is matched with 

the type you choose in the Record Device. Error may occur if the 

USB printer type is not matched.

USB Record Style  Choose from: 3×4, 3×4+1R, 3×4+3R, 6×2, 6×2+1R or 12×1 

It defines the style of USB report. 

Grid of Report 

Choose from: On or Off 

When it is set to On, the grid will be printed while printing ECG reports 

with the thermal recorder or USB printer. 

6.4 Patient Information Setup   

Item 

Description 

First/Last Name 

Choose from: On or Off 

When it is set to On, patient name will be divided into first name and last 

name.

ID 

Choose from: Auto, Time or Manual  

ID Hint 

Choose from: On or Off 

In the AUTO or RHYT mode, when ID is set to Manual and ID Hint is 

set to On, if you do not input the patient ID before pressing the 

PRINT/STOP key, a hint will pop up to remind you to input the patient 

ID. 

Age 

Choose from: Age, D.O.B or Age Group 

PatInfo Refreshed 

Choose from: On or Off  

Select On, the patient information will be refreshed after the ECG report 

is printed out and all the leads are off. 

H/W Unit 

Choose from: cm/kg or inch/lb 

BP Unit 

Choose from: mmHg or kPa 

Order Acquired 

Choose from: On or Off   

Select On, the Order item will be displayed in the Patient Information 

window and you can acquire orders by clicking it.