Festool Domino Machine Instruction Manual - page 15

end grain no matter which cutter you use 

or which width setting you select.  Neat!

The third accessory is for stabilizing the 

Domino machine when used upright cut-

ting into the face of a work piece regis-

tered off of an edge.  It is an auxiliary 

fence that screws to the bottom of the 

moving portion of the Domino fence.  

This photo shows it installed with the 

fence set to 45 degrees.  Right is a 

photo showing the auxiliary fence 

before it is mounted to the bottom of 

the moving portion of the Domino 

fence, shown here set at zero de-

grees (perpendicular to the move-

ment of the cutter.)

Now that we are familiar with the 

Domino machine and the variety 

of ways to accurately register the 

location of the mortise slot, let’s 

take a look at the six ways you 

can join two pieces of wood to-

gether.  

Then we will move on 

to several build-along 

projects that show the 

amazing versatility of 

this innovative wood 

working tool.