Festool Domino Machine Instruction Manual - page 4
The Domino Body
This sequence of photos shows how the
body and fence can easily be separated
by simply raising the lock tab as shown
here. The wrench used to change cutters
is ideal for this. Hook the edge of the
wrench beneath the lock tab and lift it up.
The fence will start to slide off the body
as shown in the photos left and above
exposing the rotating and oscillating cut-
ter (red arrow).
In the photo above you can see the two
hardened shafts (green arrow pointing to
the right shaft) that the body slides on as
you push the body in to cut the mortise
slot. They ensure the mortise slot will be
exactly parallel to the base of the Domino
machine, one of the keys to Domino’s
impressive accuracy.
Here is a view of the under side of the
body. The round housing held by the four
screws is gear driven to move the cutter
tip back and forth in a horizontal arc while
the cutter is also rotated to make the cut.