Combivert gb instruction manual encoder interface channel 1 resolver channel 2 variable mat.No. Rev. Drf5zem-k001 1c.
Table of contents gb - 3 1. Safety instructions ........................................................................................ 4 1.1 validity ................................................................................................................4 1.2 qualification ...................
Safety instructions gb -4 1. Safety instructions prior to performing any work on the unit the user must familiarize himself with the unit. This includes especially the knowledge and observance of the safety and warning directions. The pictographs used in this instruction manual have following meanin...
Resolver at channel 1 gb-5 2. Product description figure 1: resolver at channel 1 2mf5280-0028 /-0029 1mf5280-0028 /-0029 x3a channel 1 x3b channel 2 x3a channel 1 x3b channel 2 x3b x3a channel 2 channel 1 variable see material number resolver 2.1 general each of the interface cards delivered by keb...
Resolver at channel 1 gb-6 2.4 mechanical installation all kind of works on the inverter may be carried out by authorized personnel in accordance with the emc and safety rules only. • switch inverter de-energized and await capacitor discharge time • pull off operator • remove plastic cover • removef...
Resolver at channel 1 gb-7 3.1.3 input signals channel 1 3.1.3.1 signal tracks a sine-wave voltage is output at terminals ref_hi and ref_lo at the resolver interface. Thisvoltagesuppliesthefieldwindingintheresolver.Thissignalistransmittedviaarotary transformer to the rotary part of the resolver. The...
Resolver at channel 1 gb-8 3.1.4 connection of the encoder • encoder cable double-shielded and twisted in pairs • apply external shielding on both sides at the connector housing • connect interior shieldings at one side at the interface to gnd • do not connect exterior and interior shielding figure ...
Resolver at channel 1 gb-9 3.1.7 tested encoders the following resolvers have been tested by keb on it application: • tamagawa ts2620n21e11(default) • tamagawa ts2641n11e64 • ltn re-15-1-a14 • ltn re-21-1-a05 • harowe 10brcx401k1c however,thisdoesnotrestricttheuseofrotaryencoderwithsamespecification...
Resolver at channel 1 gb-10 4.1 special resolver the use of 2-pole resolvers (pole-pair number 1) is provided as standard. If a resolver with another pole-pair number shall be used, the pole-pair number is to be used as gear factor. Gear factor denominator = pole-pair number ––––––––––––––––––––– ge...
Notices gb - 11.
Keb antriebstechnik austria gmbh ritzstraße8• a-4614 marchtrenk fon:+43724353586-0•fax:+43724353586-21 net: www.Keb.At •mail: info@keb.At keb antriebstechnik herenveld2• b-9500 geraadsbergen fon:+3254437860•fax:+3254437898 mail: vb.Belgien@keb.De keb power transmission technology (shanghai) co.,ltd....
