Combivert gb instruction manual encoder interface channel 1 variable channel 2 htl output mat.No. Rev. Dlf5zem-k060 1b.
Table of contents gb - 3 1. Safety instructions ........................................................................................ 4 1.1 validity ................................................................................................................4 1.2 qualification ...................
Gb - 4 1. Safety instructions prior to performing any work on the unit the user must familiarize himself with the unit. This includes especially the knowledge and observance of the safety and warning directions. The pictographs used in this instruction manual have following meaning: danger refers to...
Encoder interface htl output on channel 2 gb - 5 2. Product description encoder interface 2m.F5.280-8008 x3b x3a channel 2 channel 1 htl output variable 2.1 general each of the interface cards delivered by keb include two interfaces. As there are numerous different combinations available each interf...
Encoder interface htl output on channel 2 gb - 6 2.4 mechanical installation all kind of works on the inverter may be carried out by authorized personnel in accordance with the emc and safety rules only. • switch inverter de-energized and await capacitor discharge time • pulloffoperator • remove pla...
Encoder interface htl output on channel 2 gb - 7 3.3 channel 2 terminal strip x3b interface type incremental encoder simulation (output) output signals htl 20…26 v (input voltage - 4 v) max.30maperoutput(brieflyshort-circuitproof) outputs / tracks a+, a-, b+, b-, n+, n- input voltage input for htl s...
Encoder interface htl output on channel 2 gb - 8 3.3.2 output signals channel 2 at the htl encoder simulation the signal tracks a and b are electrically phase-shifted by 90°.Theoutputsignalscanbeconnectedoptionallyasdifferencesignalwiththerespective inverse tracks or as single-ended signals. The zer...
Notices gb-9.
Keb antriebstechnik austria gmbh ritzstraße 8 • a-4614 marchtrenk fon: +43 7243 53586-0 • fax: +43 7243 53586-21 net: www.Keb.At • mail: info@keb.At keb antriebstechnik herenveld 2 • b-9500 geraadsbergen fon: +32 5443 7860 • fax: +32 5443 7898 mail: vb.Belgien@keb.De keb power transmission technolog...
