KEB COMBIVERT F6 Instructions For Use Manual - page 13
13
STANDArDS FOr DrIVE cONVErTErS / cONTrOL cAbINETS
Standards for drive converters / control cabinets
DGUV regulation 3 Electrical systems and equipment
DIN 46228-1
Wire-end ferrules; Tube without plastic sleeve
DIN 46228-4
Wire-end ferrules; Tube with plastic sleeve
DIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection of
electrical equipment - Earthing arrangements, protective conductors and protec-
tive bonding conductors
DIN VDE 0100-729 Low-voltage electrical installations - Part 7-729: Requirements for special
installations or locations - Operating or maintenance gangways (IEC 60364-7-
729:2007, modified); German implementation HD 60364-7-729:2009
EN 1037
Safety of machinery - Prevention of unexpected start-up; German version EN
1037:1995+A1:2008
EN 55011
Industrial, scientific and medical equipment - Radio frequency disturbance
characteristics - Limits and methods of measurement
EN 55021
Interference to mobile radiocommunications in the presence of impulse noise -
Methods of judging degradation and measures to improve performance
EN 60204-1
Safety of machinery - electrical equipment of machines Part 1: General require-
ments (VDE 0113-1, IEC 44/709/CDV)
EN 60439-1
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and
partially type-tested assemblies
EN 60529
Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1
Insulation coordination for equipment within low-voltage systems Part 1: Princi-
ples, requirements and tests (IEC 60664-1)
EN 60721-3-1
Classification of environmental conditions - Part 3-1: Classification of groups of
environmental parameters and their severities - section 1: Storage
EN 60721-3-2
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 2: Transport
EN 60721-3-3
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 3: Stationary use at
weatherprotected locations
EN 61000-2-1
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Descrip-
tion of the environment - Electromagnetic environment for low-frequency
conducted disturbances and signalling in public power supply systems
EN 61000-2-4
Electromagnetic compatibility (EMC) - part 2-4: Environment; Compatibility
levels in industrial plants for low-frequency conducted disturbances
EN 61000-4-2
Electromagnetic compatibility (EMC) - part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test
EN 61000-4-3
Electromagnetic compatibility (EMC) - part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4
Electromagnetic compatibility (EMC) - part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test
EN 61000-4-5
Electromagnetic compatibility (EMC) - part 4-5: Testing and measurement
techniques - Surge immunity test
EN 61000-4-6
Electromagnetic compatibility (EMC) - part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-34
Electromagnetic compatibility (EMC) - part 4-34: Testing and measurement
techniques - Voltage dips, short interruptions and voltage variations immunity
tests for equipment with mains current more than 16 A per phase
EN 61373
Railway applications - Rolling stock equipment - Shock and vibration tests