KEB COMBIVERT F6 Instructions For Use Manual - Attention
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
90
5.6.4 Mounting on the wall
• The cabinet system has a pull-out system for disassembling the drive converter.
• If it is necessary to remove the drive converter, make sure that the cabinet system
is securely anchored to the wall.
• The rear ring bolts must be removed for wall mounting.
• At this point, the supplied mounting brackets must be mounted with the M12 x 25
fixing screws.
• The hole diameter for wall mounting is 1 x 14 mm or 2 x 9 mm.
Figure 20: Wall mounting
ATTENTION
All supplied mounting brackets must be used for wall mounting.
51
MEcHANIcAL INSTALLATION