KEB COMBIVERT F6 Instructions For Use Manual - 5 Mechanical Installation
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
90
5 Mechanical Installation
5.1 General information
This chapter contains information about transport, assembly and the permissible ambi-
ent conditions. For further data please refer to chapter „Technical Data“.
Transport and store the cabinet system in its packaging before installation. Remove the
tightening straps and loose the fastening screws on the pallet only after reaching the
final position.
5.2 Transport of the cabinet system
WArNING
risk of tipping due to high centre of gravity!
► Transport exclusively with tightening straps and fixed screw on the
pallet.
►
Transport the cabinet system only in an upright position.
Figure 13: Transport
45
MEcHANIcAL INSTALLATION