KEB COMBIVERT F6 Instructions For Use Manual - page 61
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
90
6.7 connection motor temperature monitoring
6.7.1 General information
The motor must be protected against overheating in accordance with the regulations.
The output current is switched off if an overload of the motor occurs. The drive converter
has a thermal protection function which protects the motor and switches off the current,
if required.
T2B T1B
T2A T1A
L1‘ L2‘ L3‘
①
②
No.
Terminals
Function
①
L1‘, L2‘, L3‘
Used internally
②
T1A, T2A
Used internally
T1B, T2B
Connection for motor temperature monitoring
Figure 28: Connection motor temperature monitoring
61
ELEcTrIcAL INSTALLATION