KEB COMBIVERT F6 Instructions For Use Manual - page 37
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
90
3.7 c6 HMI program functionalities
3.7.1 Self-test at power-on-reset
• Error state of both inverter units
• Last error (e.g. prior off by error)
• Main switch state
• Supply monitoring state
• Fuse monitoring state
• Fieldbus interface
3.7.2 Monitoring cooling circuit
• Temperature of the single cooling circuits
•
Volume flow of the drive converter
• Fan function
• Moisture condensation (hydrostat)
• Humidity sensor
3.7.3 Monitoring mains
• Voltage range
• Undervoltage trip
• Overvoltage trip
• Unbalanced load detection
• Cos (phi)
• Overcurrent
• Frequency
37
FUNcTIONAL OVErVIEW