La Marzocco Linea PB Manual - page 31
EN
30
Display
Operating Procedure
Description
Programming Mode
Press Enter
To Exit
Press the T3 button
to return to the doses programming.
Press T1
or T2
until the display shows the exit menu, press the T3 button
to return to the “Barista”
programming.
Press T1
or T2
to continue with the programming of the other parameters.
Press T2
and T3
at the same time to exit the programming mode and return to the normal use of the espresso
machine.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each button on the keyboard.
• The brewing amount can be set in terms of
time (sec. ) or pulses. This number refers to
the number of pulses that the flowmeter
sends to the CPU.
• Once programmed, the button remains
lighted.
• It is possible to set the dose for both a
short and a long shot on the same key.
• The setting of the first group is automatically
copied to the subsequent groups.
• It is possible to set each key individually, in
this case the dose of the first group will no
longer be used.
• It is possible to copy the doses of any key to
the others.
(available from the 1.6.4 software version)
“Barista” Programming
6
7
8
Group Dose
Settings
Group Dose
Exit
Program Dose
LaMarzocco 00:00
CB 93.8
°C SB
5