La Marzocco Linea PB Manual - page 53
EN
52
Display
Operating Procedure
Description
Programming Mode
Except for the first group, you can set the function
USE GROUP 1
for each key.
This option allows to use the corresponding dose of the first group instead of setting it.
The setting of the first group is automatically copied to the subsequent groups.
Press the button T3
to exit the submenu.
Press T1
or T2
until the display shows the exit menu, press the T3 button
to return to the “Technical”
programming.
Press T1
or T2
to continue with the programming of the other parameters.
Press T2
and T3
at the same time to exit the programming mode and return to the normal use of the espresso
machine.
• This parameter allows the operator to view
and manually change each dose for each
key.
• For greater accuracy and consistency of the
doses, it is recommended that you set each
key.
View and Edit
Doses
Program Dose
8
9
7
Exit
View/Edit Doses
6
Group Dose
Exit
LaMarzocco 00:00
CB 93.8
°C SB
(available from the 1.6.4 software version)
“Technical” Programming