La Marzocco Linea PB Manual - page 32
EN
31
Display
Operating Procedure
Description
Programming Mode
When the espresso machine is turned on, press and hold the T3 button
to access the “Barista” programming. After
about 5 seconds the following screen is displayed.
Press the T3 button
to enter the doses programming procedure.
Press the button T1
or T2
to display the following menu.
Press the button T3
view and/or change the dose of each key.
Press the button T1
or T2
to view the dose of each key. Pressing the button T3
, the dose value will blink.
Use the button T1
or T2
to change the value, press the button T3
to confirm the desired value.
It is possible to set the value of the pulses to zero to choose a continuous dose.
• This parameter allows the operator to view
and manually change each dose for each
key.
• For greater accuracy and consistency of the
doses, it is recommended that you set each
key.
View and Edit
Doses
Program Dose
G1B1 Dose
263 Pulses
View and Edit
Doses
1
2
3
4
G1B1 Long Dose
363 Pulses
Program
Volume Dose
5
G1B1 Dose
Continuous
G1B1 Dose
Use Group 1
Group Dose
Settings
LaMarzocco 00:00
CB 93.8
°C SB
“Barista” Programming
(available from the 1.6.4 software version)