La Marzocco Linea PB Manual - page 81

EN

80

Display

Operating Procedure

Description

Programming Mode

Update Firmware

Update Firmware

“Technical” Programming

•  This  parameter  allows  the  technician  to 

update  the  control  unit  of  the  espresso 

machine via a USB Pendrive.

After accessing the “Technical” programming menu and entering the password, use the buttons T1          and T2            until 

the following screen is displayed.

Press the T3 button              to update the firmware. The following screen will immediately appear.

Insert the USB Pendrive into the USB port and press the T3 button             .

When the update is over, the espresso machine restarts. Set the switch to 0 (zero) and then again to 1.

2

Update Firmware

4

1

Enter Password

******

3

Insert USB Key

And Press Enter

OFF  

00:00