La Marzocco Linea PB Manual - page 48
EN
47
Display
Operating Procedure
Description
Programming Mode
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until
the following screen is displayed.
Press the T3 button
to enter the doses programming procedure.
Press the T3 button
to start the doses programming procedure.
To program the coffee brewing time, press the dose button to start and then press it again to stop, once the desired dose
is achieved. Successful programming is indicated by the lighting of the button. This operation must be repeated for each
button whose dose you want to set. The buttons can be programmed in any sequence.
Press the T3 button
to return to the doses programming.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each button on the keyboard.
• The brewing amount can be set in terms of
time (sec. ) or pulses. This number refers to
the number of pulses that the flowmeter
sends to the CPU.
• Once programmed, the button remains
lighted.
1
2
3
4
Group Dose
Settings
Group Dose
Settings
LaMarzocco 00:00
CB 93.8
°C SB
Program Dose
Press b To Stop
10 pulses
Press Enter
To Exit
5
G1B1 Saved
10 Pulses
Program
Volume Dose
Press Enter
To Exit
“Technical” Programming