La Marzocco Linea PB Manual - page 40
EN
39
Display
Operating Procedure
Description
Programming Mode
• This parameter allows the operator to
enable/disable the coffee boiler.
• This parameter allows the operator to
program the coffee boiler temperature.
Each group can have a different
programming.
• For an espresso machine composed of 2 and
3 groups you can only set the coffee boiler
1, while for an espresso machine with 4
groups you can also set the coffee boiler 2.
“Barista” Programming
Coffee Boiler
Settings
Coffee Boiler
1
2
When the espresso machine is turned on, press and hold the T3 button to access the “Barista” programming. After
about 5 seconds the following screen is displayed.
Move between the parameters using the buttons T1 and T2 until the display shows:
Press the T3 button to enter the menu.
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select
ENABLED
or
DISABLED
, press the T3 button to confirm the option. In the case of option enabled you
can set the following parameters.
Press the T3 button to enter the menu, move with the buttons T1 and T2 to set the desired
temperature, press the T3 button to confirm the value. In the case of espresso machine with 4 groups you can
set the temperature also on the coffee boiler 2. The temperature indicated on the left is the actual temperature of the
group while the temperature on the right is the set temperature.
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is displayed.
Press the T3 button to return to the “Barista” programming.
LaMarzocco 00:00
CB 93.8
°C SB
Program
Dose
3
Coffee Boiler
Settings
Coffee Boiler 1
ENABLED
4
CB1 Temperature
93.1
°C 93.3°C
5
CB Settings
Exit
6