La Marzocco Linea PB Manual - page 65
EN
64
Display
Operating Procedure
Description
Programming Mode
Press and hold the button T2
and T3
at the same time to turn off the espresso machine.
After accessing the “Technical” programming menu and entering the password, use the buttons T1
and T2
until
the following screen is displayed.
Press the T3
button to enter the menu, navigate the parameters using the buttons T1
and T2
until the
following screen is displayed:
Press the T3 button
to enter the menu, move using the buttons T1
and T2
to select
HIGH
or
LOW
, press
the T3 button
to confirm the option.
To exit the submenu move between the parameters using the buttons T1
and T2
until the exit submenu is
displayed. Press the T3 button
to exit the submenu.
Steam Boiler
Settings
SB Settings
Exit
• The parameter “Level Sensit.” allows the
technician to select the probe sensitivity for
steam boiler filling.
• To set this parameter the espresso machine
must be in OFF mode.
• Before you turn on again the espresso
machine, remember to replace the
connection cable.
• Black connection cable corresponding to
HIGH sensitivity.
• Red connection cable corresponding to LOW
sensitivity.
Steam Boiler
“Technical” Programming
THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER
TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH
FROM SCALDING.
DANGER
Level Sensitiv.
HIGH
1
2
3
4
5
Enter Password
******
OFF
00:00
Steam Boiler
Settings