La Marzocco Linea PB Manual - page 34
EN
33
Display
Operating Procedure
Description
Programming Mode
When the espresso machine is turned on, press and hold the T3 button
to access the “Barista” programming. After
about 5 seconds the following screen is displayed.
Press the T3 button
to enter the doses programming procedure.
Press the button T1
or T2
to display the following menu.
Press the button T3
to start the dose copy procedure.
Press the key whose setting you want to copy. Now all the keys will flash.
Press the key where you want to paste the previously copied setting. Successful programming is indicated by the fixed
lighting of the key. It is possible to repeat this procedure on any key.
Press T1
or T2
until the display shows the exit menu, press the T3 button
to return to the “Barista”
programming.
• This parameter allows the operator to
copy the doses present of each key to the
others.
Copy
Dose
Push Button
to Copy
Copy
Dose
1
2
3
4
7
Push to Paste
Enter to Exit
Group Dose
Exit
5
6
Program Dose
Program
Volume Dose
Group Dose
Settings
LaMarzocco 00:00
CB 93.8
°C SB
“Barista” Programming
(available from the 1.6.4 software version)