La Marzocco Linea PB Manual - page 52

EN

51

Display

Operating Procedure

Description

Programming Mode

After accessing the “Technical” programming menu and entering the password, use the buttons T1           and T2

until the following screen is displayed. 

Press the T3 button 

 to enter the doses programming procedure. 

Press the button  T1 

 or T2 

 to display the following menu. 

Press the button T3 

 view and/or change the dose of each key.

Press the button T1 

 or T2 

 to view the dose of each key. Pressing the button T3 

 , the dose value will blink. 

Use the button T1 

 or T2 

 to change the value, press the button T3 

 to confirm the desired value.

It is possible to set the value of the pulses to zero to choose a continuous dose.

•  This parameter allows the operator to view 

and  manually  change  each  dose  for  each 

key.

•  For greater accuracy and consistency of the 

doses, it is recommended that you set each 

key.

View and Edit

Doses

Program Dose

G1B1 Dose

263 Pulses

View and Edit

Doses

1

2

3

4

G1B1 Long Dose

363 Pulses

Program

Volume Dose

5

G1B1 Dose

Continuous

G1B1 Dose

Use Group 1

Group Dose

Settings

LaMarzocco 00:00

CB 93.8

°C SB

“Technical” Programming 

(available from the 1.6.4 software version)