La Marzocco Linea PB Manual - page 70
EN
69
Display
Operating Procedure
Description
Programming Mode
Cup Warmer
Settings
Cup Warmer
“Technical” Programming
• This parameter allows the technician to
enable or disable the cups heating function.
• This parameter allows the technician to
adjust the operating time of the resistance
for the heating of the cups.
• This function is displayed only on the
models of espresso machine equipped
with this accessory.
1
2
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until
the following screen is displayed.
Press the T3 button to enter the menu.
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select
ENABLED
or
DISABLED
, press the T3 button to confirm the option.
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2
to set the desired time, press the T3 button to confirm the value.
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2
to set the desired time, press the T3 button to confirm the value.
To exit the submenu move between the parameters using the buttons T1 and T2 until the exit submenu is
displayed. Press the T3 button to exit the submenu.
Press T1 or T2 to continue with the programming of the other parameters.
Enter Password
******
7
Cup Warmer
Settings
3
Cup Warmer
ENABLED
4
Cup Warmer T On
2min
5
Cup Warmer T Off
8min
6
Cup Warmer
Exit