Lancia THESIS CONNECT Owner's Handbook Manual - 156

156

Should the system, as a result of

manual settings, no longer be able to

assure the selected temperature in

the various passenger compartment

areas, the selected temperature

value starts flashing to indicate the

system difficulty and the message

AUTO automatically turns off.

To restore the system automatic

control at any moment after one or

more manual setting, press button

AUTO.

MONO button

(set temperature and air distrib-

ution alignment) (16 fig. 121)

Press the MONO button to auto-

matically align the front/back-seat

passenger’s side temperature and air

distribution to the temperature air

distribution on driver’s side.

Consequently, the temperature and

air distribution in the two areas can

be set simply by turning the knob on

driver’s side. This function is provided

to facilitate adjusting the temperature

in the passenger compartment when

only the driver is present.

To restore separate temperature and

air distribution control in the two

passenger compartment areas, rotate

knob 8 (fig. 121) or 1 (fig. 122) to set

up temperature in the front/back-

seat passengers’ area or press again

button MONO 16 (fig. 121) when the

button led is on.

REAR button (rear control panel

activation) (11 fig. 121)

Press the REAR button to switch

the rear control panel on and to cut

out the front control panel. As a

result, back-seat passengers can

select temperature, air distribution

and fan speed according to their

needs.

When rear controls are activated,

the led on button REAR is on.

IMPORTANT The fan speed can

be adjusted manually also by the

rear control panel, when activated,

but it is the same one for the whole

passenger compartment.