Lancia THESIS CONNECT Owner's Handbook Manual - 279
279
19) On versions with alloy rims, to
make the wheel fitting easier, screw
the pin A (fig. 16), provided in the
tool kit, to the hub and then place
the wheel and tighten up the four
bolts in the free holes. Finally,
unscrew pin A and screw the last
bolt.
On versions with steel rims, fit the
wheel making pin A (fig. 17) coin-
cide with one of the holes B.
IMPORTANT To make bolt tight-
ening easier, use the proper bolt
bush A (fig. 15).
Wheel bolts are specific
for the type of rim (alloy
or steel) fitted. Never use,
also if in an emergency, wheel
bolts for another type of rim.
When changing rims (alloy rims
instead of steel ones or vice
versa), also the whole wheel bolt
set shall be changed with other
bolts specific for the new type of
rim adopted.
20) Lower the car and remove the
jack (fig. 18).
fig. 16
L0A0043b
fig. 17
L0A0366b
fig. 18
L0A0044b