Lancia THESIS CONNECT Owner's Handbook Manual - 194
194
CRUISE CONTROL
(CONSTANT SPEED
REGULATOR)
GENERAL
The electronic cruise control allows
to drive your car at the required
speed without pressing the accelera-
tor pedal. This reduces fatigue when
driving on motorways, especially
during long journeys, because the
set speed is automatically main-
tained.
IMPORTANT The device can only
be set to speeds exceeding 30 km/h
(40 to 180 km/h for 2.4 JTD 20V
CAE version).
The cruise control must
only be used when the
road and traffic condi-
tions allow to keep a constant
speed in total safety for an ade-
quately long time.
CONTROLS (fig. 143)
The cruise control is operated by
means of switch A, ring B and but-
ton C (RCL).
Switch A has two positions:
– OFF in this position, the device is
off
– ON this is the normal device
operating position. When the device
is ON, symbol Ü lights up on the
multifunction display, together with
message “CRUISE CONTROL ON”.
Ring B is used to set and maintain
the car speed or to increase or
decrease the set speed.
The device is automatically
switched off when:
– the brake pedal is pressed
– the clutch pedal is pressed
– the gear lever is unintentionally
shifted to N.
In versions with auto-
matic transmission, never
shift the lever to N when
the car is running.
fig. 143
L0A0208b