Lancia THESIS CONNECT Owner's Handbook Manual - 236

236

fig. 211

L0A0094b

After placing the load with the pro-

tection, secure it by means of the

belt to prevent it from shifting in

case of sudden braking or collision.

To secure the protection with the

load:

1) Get the protection belt to pass

around the armrest.

2) Hold the belt tight by pulling its

end, while holding buckle A (fig.

209).

3) Secure the load by inserting the

attachment of belt A (fig. 210) into

the buckle of the central rear safety

belt.

To release the protection with the

load:

1) Release the belt by pressing the

button on the safety belt buckle.

2) Loosen the tension of the belt by

making the latter slide into buckle A

(fig. 211) while pressing button B.

3) Slip the protection belt from the

armrest and fold it up into its seat.

Close the flaps by pushing them

into their seat to locking.

fig. 209

L0A0093b

fig. 210

L0A0095b