Oce Arizona T220 User Manual - page 29
Other manuals for Arizona T220:
System Data, User Manual
Manual is about: Six color digital inkjet large format printer
of
104
Menu Structure |
10/16/03
2-17
6. Press ACCEPT. You then see:
NOZZLE PRINT
dir: bidir L<-->R
7. Press ACCEPT. You then see:
NOZZLE PRINT
1 pass
Use the +/- buttons to select the number of passes (1 -100), and press ACCEPT.
8. Press ACCEPT. You then see:
NOZZLE PRINT
vertical offset from origin: x.xx m
Use the +/- buttons if you want to change the origin
9. Press ACCEPT. You then see:
NOZZLE PRINT
print width:
10. Press ACCEPT. You then see:
NOZZLE PRINT
Thickness: 0.00m (noUL), Heat xx%
Use the +/- buttons if you want to change the thickness or heat setting.
Refer to section “Changing Print Job Settings” on page 34 for details
on changing these settings.
The printer begins printing the Nozzle Print. The control panel displays the on-
line statistics.