Oce Arizona T220 User Manual - page 67
Océ Ink and Solvent |
10/16/03
4-55
3.
Place the attached lid on the new ink bottle and screw it on tightly;
4.
Dispose of the used ink in an environmentally friendly manner.
5.
Press ACCEPT on the control panel to enter the type of color and begin printing.
4.1.3
Scanning Ink Barcodes
The T220 printer calculates the amount of ink used for each color printed and determines
when the volume for a bottle of a particular color ink is used. At this point you will be
prompted to enter the barcode from a new bottle of ink. This may not necessarily corelate
with an empty ink bottle. Therefore you may already have changed the ink bottle by the
time you are queried for a new ink barcode. You can either:
A) Enter the new bar code when you change an ink bottle (Go to Step 1 below), or
B) Wait until you see the following display (Go to Step 2 below);
1.
Navigate to the Operator\Barcode menu and select the color of ink to change. Press
ACCEPT to continue and you will see the following display.
Caution:
Do not use the residual ink to top up the ink in another bottle as this
will introduce contaminants that collect at the bottom of the bottle.
Warning:
Océ Display Graphics Systems accepts no liability when non-Océ ink
is used. Customers using non-Océ ink assume all risk of damage that
might result. Customer agrees to waive any claims or rights they may
otherwise have against Océ Display Graphics Systems or its agents for
damage and/or loss of business resulting from use of non-Océ ink.
Ink Barcode expired
Press ACCEPT to continue
Scan barcode (Light Magenta)
ACCEPT -> Manual Entry