Oce Arizona T220 User Manual - Color Bar
Menu Structure |
10/16/03
2-19
COLOR BAR
The Color Bars menu prints a set of color bars. The eleven color bars start with
Light Magenta and end with Black. Follow these steps to print the color bars:
1. Press the MENU button twice at TEST PRINTS nozzle print. You then
see:
TEST PRINTS
color bars
2. Press ACCEPT. You then see:
COLOR BARS
overlap: (4, or 8-pass)
3. Use the +/- buttons to set overlap type and press ACCEPT. You then see:
COLOR BARS
dir.: (bidir L<->R, unidir L<-R, unidir L->R)
4. Use the +/- buttons to set the write direction, and press ACCEPT. You
then see:
COLOR BARS
position: (left, center, or right)
5. Use the +/- buttons to set the print origin, and press ACCEPT. You see:
COLOR BARS
print width: (8.0" - 59.9")
6. Use the +/- buttons to set print width (8.0" - 59.5"), and press ACCEPT.
You then see:
COLOR BARS
(4 or 8) pass
7. Use the +/- buttons to select the number of passes, and press ACCEPT.
The printer begins printing the color bars.
CONFIGURATION PRINT
The Configuration Print menu provides the operator and Océ Display Graphics
Systems service technicians with a printout of machine-settings data that is useful if
the unit must be diagnosed or recalibrated. A current configuration print for your
printer should be stored for reference.