Oceanic VEO 3.0 Operating Manual - page 13

13

Menu button action >>

A (< 2 sec) - to access and step forward through menu selections

A (hold) - to scroll forward through menu selections

M (< 2 sec) - to step backward through menu selections

S (< 2 sec) - to access or save selections

Pressing A (< 2 sec) while viewing the last selection in the menu will revert to the first selec-

tion (such as Surface Main).

Pressing M (< 2 sec) while viewing the Surface Main will jump to the last menu selection 

(such as SN), then continued presses will step back. 

SMARTGLO

®

 Backlight

The VEO is configured with a sensor capable of measuring the intensity of ambient light.  

The Backlight will only come on when light level is low.

To activate the SmartGlo Backlight >> press the S button.  

•  If ambient light level is low, the Backlight will activate and illuminate the display 

for button depression time* plus the Duration time set (0, 5, or 10 seconds), for a 

maximum of 20 seconds.

    (*The Backlight will turn Off if S is depressed for more than 10 seconds.)

•  Press S again to activate as desired.  

Extensive use of the Backlight reduces estimated Battery life.  Also, 

the Backlight does not operate during a Low Battery Condition or 

when the VEO is connected to a PC.