Oceanic VEO 3.0 Operating Manual - page 20

20

ACTIVATION 

To activate the VEO, press/release any button.

•  The unit will enter Diagnostic Mode displaying all segments 

of the LCD as 8's, followed by dashes (- -), then a 

countdown from 9 to 0.  It checks the display and voltage 

to ensure that everything is within tolerance.   

•  After manual activation, it will also check the ambient 

barometric pressure, and calibrate its present depth as 0.  

At elevations of 3,001 feet (916 meters) or higher, it will 

adjust depth calibration for the higher altitude. 

The VEO is configured with contacts located on the stems of the 

buttons and pins of the PC Data Port that will automatically acti-

vate the unit and cause it to enter dive mode when the contacts 

become wet and it senses depth of 5 FT (1.5 M).  

After activation and diagnostics, the VEO will enter NORM 

Surface Mode displaying the Main screen and allow access to 

the NORM Surface Menu.  

NORM Surface Main/Menu, button action

•  A (< 2 sec) >> step forward through Menu items.

•  A (hold) >> scroll forward through Menu items.

•  M (< 2 sec) >> step back through Menu items.

•  S (press) >> activate the SmartGlo Backlight.

•  M (2 sec) or 2 min (of no button action) >> revert to Main.

MENU 

SEQUENCE

MAIN

ALT 1

ALT 2

ALT 3

FLY/SAT

PLAN

LOG

SET F

SET A

SET U

SET T

SET M

HISTORY

SN