Oceanic VEO 3.0 Operating Manual - page 94

94

CARE AND CLEANING

Protect your VEO  from shock, excessive temperatures, exposure 

to chemicals, and tampering.  Protect the lens against scratches 

with a Instrument Lens Protector.  Small scratches will naturally 

disappear underwater. 

•  Soak and rinse the VEO in fresh water at the end of each 

day of diving, and check to ensure that the areas around 

the Low Pressure (Depth) Sensor (Fig. 113a), PC Interface 

Data Port (Fig. 113b), and buttons are free of debris or 

obstructions.   

•  To dissolve salt crystals, use lukewarm water or a slightly 

acidic bath (50% white vinegar/50% fresh water).  After 

removal from the bath, place the VEO under gently running 

fresh water and towel dry before storing.  

•  Transport your VEO cool, dry, and protected.

INSPECTIONS AND SERVICE

Your  VEO should be inspected annuallyby an Authorized 

Oceanic Dealer who will perform a factory prescribed function 

check and inspection for damage or wear.  To keep the 2 year 

limited warranty in effect, this inspection must be completed one 

year after purchase (+/- 30 days).  

Fig. 113 - CASE BACK

b

a