Oceanic VEO 3.0 Operating Manual - page 30

30

Log Data 3, information includes (Fig. 14):

>  Log Mode (book) icon

>  O2% at end of dive, 2 dashes if Violation Gauge Mode, with 

O2SAT icons

>  Highest PO2 (ATA) reached during the dive with PO2 and 

MAX icons

>  FO2 Set Point (or graphic Air) for Gas in use when dive 

ended, with FO2 icon

>  Gas 1 (or 2) icon, one in use when dive ended

>  NX, (PZ+) icons - if they apply

•  S (< 2 sec) to revert to the Preview screen.

•  S (2 sec) to revert to the Data 2 screen.

•  S (press) to activate SmartGlo Backlight.

SET F MENU (NORM FO2)  

Sequence >> FO2 Gas 1 >> FO2 Gas 2 >> 50% Default

When the FO2 50% Default is set Off, FO2 will remain set at the last Gas 1 Set Point 

saved during that period of activation.

When the FO2 50% Default is set On and FO2 for Gas 1 is set for a numerical value, 10 

minutes on the surface after that dive the FO2 Gas 1 will be displayed as 50 and further 

dives will be calculated based on 50% O2 for oxygen calculations and 21% O2 for Nitro-

gen calculations (79% Nitrogen), unless FO2 Gas 1 is set before the dive. 

Fig. 14 - LOG DATA 3