Oceanic VEO 3.0 Operating Manual - page 45
Manual is about: Dive Computer
of
112
45
SET M (DIVE OP MODE)
Sequence >> Lead-in >> NOR (or GAU or FRE)
Set Point remains as set until changed.
Set M Lead-in, information includes (Fig. 40):
> Graphics SEt and M
• A (< 2 sec) to step forward to History.
• M (< 2 sec) to step back to Set T Lead-in.
• S (< 2 sec) to access Set Dive Op Mode.
Set Dive Operating Mode, information includes (Fig. 41):
> Graphics SEt and OP with DIVE icon
> Set Point flashing
• A (< 2 sec) to step forward through Set Points of NOR,
GAU, and FRE.
• M (< 2 sec) to step back through Set Points.
• S (< 2 sec) to save the setting and access that mode's
Surface Main screen.
• S (2 sec) to revert to Set M Lead-in.
Fig. 40 - SET M LEAD-IN
Fig. 41 - SET DIVE OP MODE