Oceanic VEO 3.0 Operating Manual - page 41
41
Set Backlight Duration (Glo), information includes (Fig. 33):
> Graphics SEt and GLO -
> Time Set Point flashing with sec icon
• A (< 2 sec) to step upward through Set Points of 0, 5, and
10 (sec) one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the setting and access Set SR.
• S (2 sec) to revert to Set CF.
Backlight (Glo) Duration is the time the backlight will remain On
after S is released (0 = no additional time).
Set Sampling Rate (SR), information includes (Fig. 34):
> Graphics SEt and SR -
> Time Set Point flashing with sec icon
• A (< 2 sec) to step upward through Set Points of 2, 15, 30,
and 60 (sec) one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the setting and revert to Set U Lead-in.
• S (2 sec) to revert to Set Glo.
Sampling Rate is the frequency at which data is sampled and stored
for download to the OceanLog PC Interface program.
Fig. 33 - SET GLO
Fig. 34 - SET SAMPLING