Oceanic VEO 3.0 Operating Manual - page 61

61

Fig. 60  - SS MAIN

(set for Run Timer)

•  M (2 sec) to access Gas Switching.

•  S (< 2 sec) to acknowledge alarms and activate Backlight.

When the SS is set for Timer, the graphic TMR with Run Time 

counting up from 0:00 to 9:59 (min:sec) then 10 to 999 (min) 

will be displayed (Fig. 60) instead of a set Stop Depth/Time.

•  A (< 2 sec) to access Dive ALTs**.

•  M (2 sec) to access Gas Switching.

•  S (< 2 sec) to acknowledge alarms and activate Backlight.

•  S (< 2 sec) to start/stop Timer, blocked when pressed to 

acknowledge/silence alarms.

•  S (2 sec), when Timer is stopped, to reset it to 0:00, 

blocked when pressed to acknowledge/silence alarms.

** SS features up to 3 ALT displays which are similar to the No Deco 

Main, ALT1, and ALT2 displays, respectively.

DECOMPRESSION

Decompression mode activates when theoretical No Decompres-

sion time and depth limits are exceeded.  

Upon entry into Deco, the audible will sound and the alarm LED 

will flash.  The full TLBG and Up Arrow icon will flash (Fig. 61) 

until the audible is silenced. 

•  S (< 2 sec) to silence Audible.

Fig. 61  - DECO ENTRY

(during audible)