- DL manuals
- Panasonic
- Telephone Accessories
- KX-TD1232
- Installation Manual
Panasonic KX-TD1232 Installation Manual
Summary of KX-TD1232
Page 1
Kx-td816 model kx-td1232 digital super hybrid system installation manual d1232 digital super hybrid system panasonic panasonic d816 digital super hybrid system please read this manual before connecting the digital super hybrid system..
Page 2
2 installation manual thank you for purchasing this panasonic model kx-td816 / kx-td1232, digital super hybrid system..
Page 3: System Components
System components installation manual 3 system components system components table model description service unit kx-td816 kx-td1232 digital super hybrid system (main unit) digital super hybrid system (main unit) telephone kx-t7420 kx-t7425 kx-t7431 kx-t7433 kx-t7436 kx-t7320 kx-t7335 kx-t7350 kx-t72...
Page 4
System components 4 installation manual optional equipment kx-t7440 kx-t7441 kx-t7240 kx-t7040 digital dss console digital dss console digital dss console dss console kx-td112 kx-td160 kx-td161 kx-td170 kx-td171 kx-td180 kx-td185 kx-td187 *1 kx-td191 *1 kx-td192 *1 kx-td193 kx-td194 kx-td196 *1 kx-t...
Page 5
Important safety instructions installation manual 5 important safety instructions when using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: a) read and understand all instructions...
Page 6: Save These Instructions
Important safety instructions 6 installation manual 4) if the product does not operate normally by following the operating instructions. Adjust only those controls, that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often requir...
Page 7: Attention
Attention installation manual 7 attention • keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the digital super hybrid system. • this unit should be kept free...
Page 8
Attention 8 installation manual accessory order information • replacement parts and accessories are available through your local authorized parts distributor. • for ordering accessories, call toll free: 1-800-332-5368. W:white b:black when you ship the product carefully pack and send it prepaid, ade...
Page 9: Introduction
Introduction installation manual 9 introduction this installation manual provides technical information for the panasonic digital super hybrid system, kx-td816 / kx-td1232. It is designed to serve as an overall technical reference for the system and includes a description of the system, its hardware...
Page 10
Introduction 10 installation manual along with this installation manual, the following manuals are available to help you know the available features, program and use the kx-td816 / kx-td1232 system. Features guide provides information about the system features. Programming guide provides system prog...
Page 11: Information
F.C.C requirements and relevant information installation manual 11 f.C.C requirements and relevant information 1. Notification to the telephone company this equipment complies with part 68 of the fcc rules and the requirements adopted by the acta. On the bottom of this equipment is a label that cont...
Page 12
F.C.C requirements and relevant information 12 installation manual 5. Trouble with this equipment if trouble is experienced with this equipment, for repair or warranty information, please see the attached warranty, which includes the servicenter directory. If the equipment is causing harm to the tel...
Page 13
F.C.C requirements and relevant information installation manual 13 caution any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. When programming emergency numbers and / or making test calls to emergency nu...
Page 14: Table of Contents
Table of contents 14 installation manual table of contents 1 system outline 1.1 system highlights ........................................................................................................ 18 1.1.1 system highlights .........................................................................
Page 15
Table of contents installation manual 15 2.4.11 system connection .................................................................................................. 118 2.5 auxiliary connection for power failure transfer ..................................................121 2.5.1 auxiliary connectio...
Page 16
Table of contents 16 installation manual.
Page 17: Section
System outline installation manual 17 section 1 system outline this section provides general information on the system, including system capacity and specifications..
Page 18: 1.1
System outline 18 installation manual 1.1 system highlights 1.1.1 system highlights system maximum capacity module expansion expansion modules are used to increase the system capacity. Extra device port (xdp) each extension jack in the system supports the connection of a digital proprietary telephon...
Page 19
System outline installation manual 19 system connection *1 with the addition of the optional system inter connection card, two digital super hybrid systems can be connected together to expand the system to a maximum of 24 outside lines and 64 extensions. The two systems function as one, therefore, s...
Page 20
System outline 20 installation manual caller id allows the user to see the name or telephone number of a caller on the telephone display before answering a call. Trunk (outside line) answer from any station (tafas) ringing occurs over the external paging system; the call can be answered from any sta...
Page 21: 1.2
System outline installation manual 21 1.2 basic system construction 1.2.1 basic system construction the kx-td816 digital super hybrid system has a basic capacity of four outside lines and eight extensions, and the kx-td1232 has eight outside lines and 16 extensions. They are capable of supporting pa...
Page 22: 1.2.2
System outline 22 installation manual 1.2.2 system connection diagram kx-td816 panasonic d816 digital super hybrid system avoid using the same ac outlet for office equipment and the kx-td816. Use a dedicated ac outlet only. External music source amplifier speaker printer for smdr or personal compute...
Page 23
System outline installation manual 23 note • it is recommended that extension of jack 1 is a display proprietary telephone. • parallel connection of telephones is possible. Refer to the parallel telephone connection in 2.3.3 telephone connection. D816 degital super hybrid system panasonic kx-t7400 s...
Page 24
System outline 24 installation manual kx-td1232 d1232 digital super hybrid system panasonic printer for smdr or personal computer for system programming ac surge protector 120 vac, 60 hz avoid using the same ac outlet for office equipment and the kx-td1232. Use a dedicated ac outlet only. External m...
Page 25
System outline installation manual 25 note • it is recommended that extension of jack 1 is a display proprietary telephone. • parallel connection of telephones is possible. Refer to the parallel telephone connection in 2.3.3 telephone connection. Panasonic panasonic doorphone 1 doorphone kx-t30865 d...
Page 26: 1.3
System outline 26 installation manual 1.3 proprietary telephones 1.3.1 proprietary telephones the following panasonic proprietary telephones are available with this system. Note flexible co : flexible co button (programmable) pf : programmable feature button proprietary telephone description kx-t742...
Page 27: 1.4
System outline installation manual 27 1.4 options 1.4.1 options model no. Model name description max. Quantity on kx- td816 max. Quantity on kx-td1232 single system system connection kx-td170 8-station line unit adds 8 extension lines. 1 2 4 kx-td171 8-station line unit with slt cid adds 8 extension...
Page 28
System outline 28 installation manual kx-td194 slt message waiting lamp adaptor unit supports the message waiting feature for a single line telephone with a message waiting lamp. One unit supoorts 16 extensions. 1 2 4 kx-td196 remote card supports the programming and maintenance of the system from a...
Page 29: 1.4.2
System outline installation manual 29 1.4.2 expansion unit combination kx-td816 kx-td1232 master system basic (no unit connected) + kx-td17x + kx-td180 / kx-td185 + kx-td284 + kx-td38x kx-td38x kx-td284 kx-td180 / kx-td185 kx-td17x basic (no unit connected) + kx-td17x + kx-td180 / kx-td185 + kx-td18...
Page 30
System outline 30 installation manual kx-td1232 slave system (kx-td187 or kx-td290 is not connected to the master system) kx-td1232 slave system (kx-td187 or kx-td290 is connected to the master system) note • : combination possible; : combination not possible; shaded part: these combinations appear ...
Page 31: 1.5
System outline installation manual 31 1.5 specifications 1.5.1 general description control method cpu: 16-bit cpu switching non blocking pcm time switch power supplies primary 120 v ac, 60 hz secondary station supply volt: 30 v circuit volt: 5 v, 15 v power failure • memory backup duration: seven ye...
Page 32
System outline 32 installation manual station message detail recording (smdr) interface serial interface (rs-232c) (d-sub, 25-pin) output equipment printer detail recording date, time, extension number, outside line number, dialed number, ring duration, call duration, account code, caller id, timed ...
Page 33: 1.5.2
System outline installation manual 33 1.5.2 characteristics station loop limit proprietary telephone: 40 single line telephone: 600 including set doorphone: 20 minimum leakage resistance 15 000 maximum number of station instruments per line 1 for proprietary telephone or single line telephone 2 by p...
Page 34: 1.5.3
System outline 34 installation manual 1.5.3 system capacity lines, station equipment actual capacity will depend on the number or / and type of units connected to the system. System data item max. Quantity on kx-td816 max. Quantity on kx-td1232 single system system connection doorphones 4 4 8 door o...
Page 35: Section
General installation installation manual 35 section 2 general installation.
Page 36: 2.1
General installation 36 installation manual 2.1 before installation 2.1.1 before installation please read the following notes concerning installation and connection before installing the system and terminal equipment. Safety installation instructions when installing telephone wiring, basic safety pr...
Page 37
General installation installation manual 37 wiring precautions be sure to follow these instructions when wiring the unit: a) to assure good quality telephone connection, it is recommended new and modifications to existing installation of customer premise wiring shall use solid twisted pair copper co...
Page 38: 2.2
General installation 38 installation manual 2.2 installation of the main unit 2.2.1 unpacking unpack the box and check the items below: kx-td816 kx-td1232 main unit one one ac cord one one template one one screws (wall mounting) three four pager connectors — two music source connectors — two expansi...
Page 39: 2.2.2
General installation installation manual 39 2.2.2 location of interfaces overview kx-td816 kx-td1232 d816 digital super hybrid system panasonic external music jack paging jack system clear switch reset button serial interface (rs-232c) connector ground terminal ac inlet power switch power indicator ...
Page 40
General installation 40 installation manual inside view kx-td816 kx-td1232 extension modular jacks outside line modular jacks fuse front cover remote system inter connection disa doorphone outside line modular jacks extension amphenol connector paging jack 2 paging jack 1 external music jack 2 exter...
Page 41: 2.2.3
General installation installation manual 41 2.2.3 wall mounting this set is designed for wall mounting only. The wall where the main unit is to be mounted must be able to support the weight of the main unit. If screws other than the ones supplied are used, use screws with the same diameter as the on...
Page 42
General installation 42 installation manual mounting on concrete or mortar wall 1. Place the template (included) on the wall to mark the screw positions. 2. Drill holes and drive the anchor plugs (user-supplied) with a hammer, flush to the wall. 3. Install the screws (included) into the anchor plugs...
Page 43: 2.2.4
General installation installation manual 43 2.2.4 opening front cover 1. Loosen the two screws on the right side of the main unit. 2. Open the front cover in the direction of arrow . Note the two screws are attached to the front cover with springs so that they will not be lost. A d1232 digital super...
Page 44: 2.2.5
General installation 44 installation manual 2.2.5 frame ground connection important connect the frame of the main unit to ground. 1. Loosen the screw. 2. Insert the grounding wire. 3. Tighten the screw. 4. Connect the grounding wire to ground. In most of the continental united states, the ground pro...
Page 45: 2.3
General installation installation manual 45 2.3 connection 2.3.1 outside line connection connection 1. Insert the modular plugs of the telephone line cords (4-conductor wiring) into the modular jacks on the system. 2. Connect the line cord to the terminal board or the central office jack. Kx-td816 (...
Page 46
General installation 46 installation manual kx-td1232 notice • use twisted pair cable for installation. • it is recommended to use rj14c telephone jacks. • mis-connection may cause the system to operate improperly. See 5.1.1 installation and 5.1.2 connection before connection. Remote system inter co...
Page 47: 2.3.2
General installation installation manual 47 2.3.2 extension connection kx-td816 extension jacks 1 through 8 are for all kinds of telephones. Maximum cabling distance the maximum length of the extension line cord (twisted cable) which connects the system and the extension is as follows: telephone wir...
Page 48
General installation 48 installation manual connection kx-td1232 extension jacks 1 through 16 are for all kinds of telephones. Maximum cabling distance the maximum length of the extension line cord (twisted cable) which connects the system and the extension is as follows: telephone wiring 2, 4 or 6-...
Page 49
General installation installation manual 49 * 3-pair twisted cabling: telephone wiring single line telephones telephone wiring 1 pair wire (t, r) digital proprietary telephone (e.G., kx-t7436, kx-t7235) 1 pair wire (d1, d2) or 2 pair wire (d1, d2, t, r) for extra device port analog proprietary telep...
Page 50
General installation 50 installation manual connection 1. Insert the 50-pin connector to the extension jack as shown. 2. Connect the wire cords to the appropriate connector pins and the terminal equipment. Refer to the telephone wiring (page 48) and pin number chart (page 51). 3. After inserting the...
Page 51
General installation installation manual 51 pin number chart pin no. Cable color extn. 1-8 / doorphone extn. 9-16 8extn.* 8extn.* 26 1 27 2 28 3 wht-blu blu-wht wht-orn orn-wht wht-grn grn-wht jack no.1 t r d1 d2 p1 p2 jack no.9 t r d1 d2 p1 p2 jack no.17 t r d1 d2 p1 p2 jack no.25 t r d1 d2 p1 p2 2...
Page 52
General installation 52 installation manual note *"8extn" in the table indicates an extension expansion area for 8-station line unit (kx-td170) or 8-station line unit with slt cid (kx-td171). System programming is required for card location identification. • if a telephone or answering machine with ...
Page 53
General installation installation manual 53 programming guide reference [007] dss console port and paired telephone assignment [109] expansion unit type features guide reference dss console module expansion.
Page 54: 2.3.3
General installation 54 installation manual 2.3.3 telephone connection proprietary telephone / dss console connection connect proprietary telephones and dss consoles as follows: analog proprietary telephone ncluded telephone ine cord connect to a digital super hybrid system ( to emss )..
Page 55
General installation installation manual 55 kx-t7200 series digital proprietary telephone kx-t7400 series digital proprietary telephone included telephone line cord connect to a digital super hybrid system ( to emss ). Connect to a single line telephone jack, telephone answering machine, or fax for ...
Page 56
General installation 56 installation manual kx-t7400 dss console / kx-t7240 digital dss console kx-t7440 / kx-t7441 digital dss console kx-t7440 and kx-t7441 can be connected to a kx-t7400 series digital proprietary telephone. Use the attached plates and screws as follows. Connect to a digital super...
Page 57
General installation installation manual 57 paralleled telephone connection any single line telephone can be connected in parallel with a proprietary telephone as follows: method 1: using a modular t-adaptor any single line telephone can be connected in parallel with a proprietary telephone as follo...
Page 58
General installation 58 installation manual method 2: for digital proprietary telephones only note • the kx-td1232 is illustrated as the main unit. • not only a single line telephone but a single line device such as an answering machine, a facsimile or a modem (personal computer) etc., can be connec...
Page 59: 2.3.4
General installation installation manual 59 2.3.4 extra device port (xdp) connection a digital proprietary telephone and a single line telephone can be connected to the same extension jack yet have different extension numbers (extra device port feature). System programming is required for this jack....
Page 60: 2.3.5
General installation 60 installation manual 2.3.5 polarity sensitive telephone connection if your telephone is polarity sensitive, follow the procedure below: 1. Complete all the required extension wiring. 2. Confirm that dialing can be done from all the extensions using a touch-tone telephone. If d...
Page 61
General installation installation manual 61 7. Reverse as shown. 8. Every time an extension telephone is replaced, repeat the above procedure. Note the kx-td1232 is illustrated as the main unit. D1232 digital super hybrid system 1 2 3 4 5 6 7 8 9 0 # central office line reverse here extension.
Page 62: 2.3.6
General installation 62 installation manual 2.3.6 external pager (paging equipment) connection kx-td816 one external pager (user-supplied) can be connected to the kx-td816 as illustrated below. Use an rca connector and shielded cable. • output impedance: 600 maximum length of the cable awg 18 — 22: ...
Page 63
General installation installation manual 63 kx-td1232 up to two external pagers (user-supplied) can be connected to the kx-td1232 per system as illustrated below. Use an rca connector and shielded cable. • output impedance: 600 maximum length of the cable awg 18 — 22: under 10 m (33 feet) note • sys...
Page 64: 2.3.7
General installation 64 installation manual 2.3.7 external music source connection kx-td816 one music source such as a radio (user-supplied) can be connected to the kx-td816 as illustrated below. Insert the plug to the earphone / headphone jack on the external music source. Use a two- conductor plug...
Page 65
General installation installation manual 65 kx-td1232 up to two music sources such as a radio (user-supplied) can be connected to the kx-td1232 per system as illustrated below. Insert the plug to the earphone / headphone jack on the external music source. Use a two-conductor plug {3.5 mm (9/64 inch)...
Page 66: 2.3.8
General installation 66 installation manual 2.3.8 printer and pc connection a user-supplied printer or personal computer (pc) can be connected to the system. These are used to print out or refer to the station message detail recording (smdr) call records and system programming data. Connect the prin...
Page 67
General installation installation manual 67 the pin configuration of serial interface (rs-232c) connector is as follows: connection chart for printer / ibm *1 personal computer if you connect a printer or a pc with a 25-pin cable, follow the chart below. Pin no. Signal name circuit type eia ccitt 1 ...
Page 68
General installation 68 installation manual if you connect a printer or an ibm-pc with a 9-pin cable, follow the chart below. Note please read your printer manual and connect the first eia pin (fg) of this unit to the printer cable. Serial interface (rs-232c) signals frame ground: fg connects to the...
Page 69
General installation installation manual 69 data carrier detect: cd (dcd) : (input) the on condition is an indication to data terminal (dte) that the carrier signal is being received. Programming guide reference [800] smdr incoming / outgoing call log printout [801] smdr format [802] system data pri...
Page 70: 2.3.9
General installation 70 installation manual 2.3.9 installation of lightning protectors overview a lightning protector is a device to be installed on an outside line to prevent a dangerous surge from entering the building and damaging equipment. A dangerous surge can occur if a telephone line comes i...
Page 71
General installation installation manual 71 outside installation diagram if you install an extension outside of the main building, the following precautions are recommended: a) install the extension wire underground. B) use a conduit to protect the wire. Note • the lightning protector for an extensi...
Page 72
General installation 72 installation manual earth rod installation diagram 1. Installation location of the earth rod: near the protector 2. Check obstructions: none 3. Composition of the earth rod: metal 4. Depth of the earth rod: more than 50 cm (20 inches) 5. Size of the grounding wire: thickness ...
Page 73: 2.4
General installation installation manual 73 2.4 installation of optional cards and unit 2.4.1 location of optional cards and units the location of the optional cards and units is shown below. Precaution to protect the printed circuit boards (p-boards) from static electricity, do not touch parts on t...
Page 74
General installation 74 installation manual kx-td1232 the following expansion units can be installed to any of the three expansion areas. Note system programming is required for expansion unit location. Refer to [109] expansion unit type. Default: area 1 = 4-co line unit, area 2 and 3 = 8-station li...
Page 75
General installation installation manual 75 doorphone card for kx-td816 remote card, system inter connection card, disa card, doorphone card for kx- td1232 install doorphone card, kx-td160/kx-td161. Kx-td160 connects two doorphones and two door openers. Kx-td161 connects four doorphones and four doo...
Page 76
General installation 76 installation manual caller id cards, pll card up to two caller id cards (kx-td193) for kx-td816, and up to three caller id cards for kx-td1232 can be installed to the initially provided outside line card and 4-co line unit. This card supports caller id services offered by the...
Page 77
General installation installation manual 77 slt message waiting lamp adaptor unit one slt message waiting lamp adaptor unit (kx-td194) for kx-td816, and up to two slt message waiting lamp adaptor units for kx-td1232 can be installed. This card supports the message waiting feature for a single line t...
Page 78: 2.4.2
General installation 78 installation manual 2.4.2 4-co line unit connection to add four outside lines (outside lines 5 through 8 for kx-td816, and outside lines 9 through 12 for kx-td1232), use the optional 4-co line unit (kx-td180). This unit can be installed to any of the expansion unit areas prov...
Page 79: 2.4.3
General installation installation manual 79 2.4.3 8-station line unit connection to add eight extensions (jack numbers 9 through 16 for kx-td816, and jack numbers 17 through 24 or 25 through 32 for kx-td1232), use the optional 8-station line unit (kx- td170). To add 16 extensions for kx-td1232 (jack...
Page 80: 2.4.4
General installation 80 installation manual 2.4.4 8-station line unit with slt cid connection the optional 8-station line unit with slt cid (kx-td171) adds eight extensions (jack numbers 9 through 16 for the kx-td816, and jack numbers 17 through 24 or 25 through 32 for the kx-td1232) in which either...
Page 81: 2.4.5
General installation installation manual 81 2.4.5 4-did line unit connection to add four did lines, use the optional 4-did line unit (kx-td185). This unit can be installed in any of the expansion areas provided on the front of the main unit. For installation, see 2.4.6 installing expansion unit. Not...
Page 82: 2.4.6
General installation 82 installation manual 2.4.6 installing expansion unit the following procedures can be used to install the optional expansion units. The following steps 1 through 5 and 7 through 10 are the same for all expansion units. Step 6 is different for each unit. The kx-td1232 is illustr...
Page 83
General installation installation manual 83 3. Hook the cabinet on the main unit and slide the cabinet to the left until it is secured. 4. Loosen the outside screw and slide the cover to the right. 5. Secure the inside screw (included) to fix the cabinet to the main unit. Note be sure to fix the ins...
Page 84
General installation 84 installation manual 6. (if a option is to be installed) if a kx-td180 / kx-td185 is to be installed; (for kx-td1232) insert the modular plugs of the telephone line cords (4-conductor wiring) into the modular jacks on the unit. Note • * for details, refer to 2.5.1 auxiliary co...
Page 85
General installation installation manual 85 if a kx-td170 / kx-td171 is to be installed; (for kx-td1232) insert the connector into the jack. Note • * for details, refer to 2.5.1 auxiliary connection for power failure transfer. • for cable pin numbers to be connected, see "pin number chart" in 2.3.2 ...
Page 86
General installation 86 installation manual 7. Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them also. 8. Close the cabinet cover and secure the outside screw. 9. Cover the cords with the cord holder (included). 10. Fix the cords to the wall as shown so t...
Page 87
General installation installation manual 87 note • if you attach the caller id card (kx-td193) to the 4-co line unit (kx-td180), attach it before installing the 4-co line unit to the main unit. For installation, refer to 2.4.8 caller id card installation. • if two expansion units are installed, cut ...
Page 88
General installation 88 installation manual amphenol 57je type (screw-attach-type 50-pin connector) connection for kx-td170 / kx-td171 to fix the amphenol 57je type (screw-attach type 50-pin connector) to the 8-station line unit or the 8-station line unit with slt cid, follow the procedure below. 1....
Page 89
General installation installation manual 89 2. To attach the amphenol 57je type (plug) to the connector, drive the accessory screw into the upper part. Fasten the accessory wire tie around the lower hook-pin and the amphenol 57je type, as shown. Accessory screw amphenol 57je type accessory wire tie ...
Page 90: 2.4.7
General installation 90 installation manual 2.4.7 disa card and remote card / unit installation the disa card (kx-td191), remote card (kx-td196), high speed remote card (kx- td197) and remote unit (kx-td198) can be installed as follows. Note if you use the kx-td170 with the kx-td198, you must use th...
Page 91
General installation installation manual 91 kx-td816 installing the remote unit (kx-td198) 1. Loose the two screws on the cover plate. Insert your fingers into the slits to remove the cover plate. Note there are two cover plates. Any of them can be removed, as needed. 2. Connect the cabinet cord to ...
Page 92
General installation 92 installation manual attaching another line expansion unit to the remote unit (kx-td198) and install them to the system. 1. Remove the front cover of the remote unit. Set the mode switch to 2 only. 2. Attach the expansion unit to the remote unit as shown below. Be sure to conn...
Page 93
General installation installation manual 93 4. Hook the cabinets onto the main unit and slide the cabinets to the left until they are secured. 5. Loosen the outside screw of the expansion unit and slide the cover to the right. 6. Secure the inside screw (inside with the remote unit) to fix the cabin...
Page 94
General installation 94 installation manual kx-td1232 installing the disa card (kx-td191) 1. Insert the upper side of the disa card into the two hooks on the main unit. 2. Press down the two corners of the lower side of the disa card. 3. Connect the cord to the disa card connector. Features guide re...
Page 95
General installation installation manual 95 installing the remote card (kx-td196) or high speed remote card (kx-td197) 1. Insert the upper side of the remote card into the two hooks on the main unit. 2. Press down the two corners of the lower side of the remote card. 3. Connect the cord to the remot...
Page 96: 2.4.8
General installation 96 installation manual 2.4.8 caller id card installation a maximum of two caller id cards (kx-td193) can be installed to the kx-td816, and a maximum of three caller id cards can be installed to the kx-td1232. The caller id cards can be installed to the initially provided outside...
Page 97
General installation installation manual 97 installing to the initial outside line card for kx-td1232 1. Loosen the eight screws to open the inside cover of the main unit. Note if any cards, units, or cords are installed to the main unit, remove them beforehand. 2. Insert the caller id card(s) to th...
Page 98
General installation 98 installation manual installing to the optional 4-co line unit the following procedure must be done before installing the 4-co line unit (kx-td180) to the main unit. 1. Loosen the five screws located at the rear of the 4-co line unit. 2. Remove the back plate and take out the ...
Page 99: 2.4.9
General installation installation manual 99 2.4.9 doorphone and door opener connection to connect up to two doorphones (kx-t30865) and up to two door openers (user-supplied), a doorphone card (kx-td160) is required. To connect up to four doorphones (kx-t30865) and up to four door openers (user-suppl...
Page 100
General installation 100 installation manual doorphone card installation (for kx-td160) 1. Connect a 4-conductor modular connector to the doorphone card cabinet, and pass the cord through the groove in the cabinet. 2. Attach the doorphone card cabinet to the main unit and press down. 3. Connect the ...
Page 101
General installation installation manual 101 doorphone card installation (for kx-td161) 1. Connect two 4-conductor modular connectors to the doorphone card cabinet, and pass the cords through the grooves in the cabinet. 2. Attach the doorphone card cabinet to the main unit and press down. 3. Connect...
Page 102
General installation 102 installation manual wiring of the doorphone (for kx-td160) 1. Connect the doorphone card to the terminal box using a 4-conductor modular connector. 2. Connect the wires of doorphone 1 to the red and green screws of the terminal box. 3. Connect the wires of doorphone 2 to the...
Page 103
General installation installation manual 103 wiring of the doorphone (for kx-td161) 1. Connect the doorphone card to the terminal box using two 4-conductor modular connectors. 2. Connect the wires of doorphone 1 to the red and green screws of the terminal box. 3. Connect the wires of doorphone 2 to ...
Page 104
General installation 104 installation manual 4-conductor wiring is required. Doorphone 3 (kx-t30865) doorphone 4 (kx-t30865) yellow red black green terminal box panasonic panasonic 4-conductor wiring is required. Doorphone 1 (kx-t30865) doorphone 2 (kx-t30865) yellow red black green terminal box pan...
Page 105
General installation installation manual 105 connecting door openers (for kx-td160) 1. Loosen the screw to remove the cover. 2. Loosen the screws on the terminal strip..
Page 106
General installation 106 installation manual 3. Insert the wires coming from the door openers into holes and tighten the screws. Pass all the wires through the holder. Note • the kx-td1232 is illustrated as the main unit. • set the door opener paired with the doorphone. • for wiring, ul 1015, awg 22...
Page 107
General installation installation manual 107 connecting door openers (for kx-td161) 1. Loosen the screw to remove the cover. 2. Loosen the screws on the terminal strip..
Page 108
General installation 108 installation manual 3. Insert the wires coming from the door openers into holes and tighten the screws. Pass all the wires through the holder. Note • the kx-td1232 is illustrated as the main unit. • set the door opener paired with the doorphone. • for wiring, ul 1015, awg 22...
Page 109
General installation installation manual 109 maximum cabling distance of the doorphone and the door opener line the maximum length of the doorphone and door opener line that connects to the main unit is shown below: note the kx-td1232 is illustrated as the main unit. Programming guide reference [607...
Page 110: 2.4.10
General installation 110 installation manual 2.4.10 slt message waiting lamp adaptor unit connection name and locations specifications 1. General description 2. Characteristics capacity corresponding extensions 16 control method cpu: one-chip microcomputer interface: 1-apt interface power supplies p...
Page 111
General installation installation manual 111 warning this unit may only be installed and serviced by qualified service personnel. Wall mounting this unit can be mounted to a wall. Refer to 2.2.3 wall mounting opening the front cover 1. Loosen the screw. 2. Slide the cover while pressing the mark. No...
Page 112
General installation 112 installation manual frame ground connection important connect the system frame to the ground. 1. Loosen the screw. 2. Insert the grounding wire. 3. Tighten the screw. 4. Connect the grounding wire to the ground. In most of the continental united states, the ground provided b...
Page 113
General installation installation manual 113 inserting the connector 1. Insert the two 50-pin connectors to the jacks as shown below. The connector "to system" should be connected to the cable which is connected to the kx-td816 / kx-td1232. Also, the connector "to extn" should be connected to the ca...
Page 114
General installation 114 installation manual dc in / out to another kx-td194 (see "slt message waiting lamp adaptor unit connection", "location of optional cards and units" in this section for a connection example.) side view.
Page 115
General installation installation manual 115 cable pins to be connected conn. Pin to system connector (cn1) to extension connector (cn2) 26 1 apt data d1 d2 extn. 1 t r 27 2 extn. 1 t r extn. 2 t r 28 3 extn. 2 t r extn. 3 t r 29 4 extn. 3 t r extn. 4 t r 30 5 extn. 4 t r extn. 5 t r 31 6 extn. 5 t ...
Page 116
General installation 116 installation manual closing the front cover 1. Fasten the binders. 2. Replace the cover and tighten the screw. 3. Tie together all of the connected cords and attach them to the wall so that the cords cannot be pulled out of the system..
Page 117
General installation installation manual 117 starting the unit plug the ac cord into the system ac inlet and an ac outlet. Avoid sharing the ac outlet of this system with other office equipment. Use a dedicated ac outlet only. Caution the power supply cord is used as the main disconnect device. Ensu...
Page 118: 2.4.11
General installation 118 installation manual 2.4.11 system connection *1 to connect two main units, use the optional system inter connection cards (two) and the connection cable (included in the cards). 1. Insert the upper side of the system inter connection card into two hooks on the main unit (mas...
Page 119
General installation installation manual 119 7. Close the latches on both systems. 8. Open the rom cover in the slave system and set the master / slave switch on the cpu card to "slave" position. 9. Turn the power on. Note • system connection is completed about three minutes after the power is turne...
Page 120
General installation 120 installation manual programming guide reference no programming required. Features guide reference system connection.
Page 121: 2.5
General installation installation manual 121 2.5 auxiliary connection for power failure transfer 2.5.1 auxiliary connection for power failure transfer power failure transfer connects specific single line telephones to selected outside lines in the event of system power failure, as follows: kx-td816 ...
Page 122
General installation 122 installation manual note • in the event of a power failure, system memory is protected by a factory-provided lithium battery. There is no memory loss except the memories of camp-on, saved number redial, last number redial, call park and message waiting. • the system changes ...
Page 123: 2.6
General installation installation manual 123 2.6 closing the front cover 2.6.1 closing the front cover 1. Fasten all the cables and cords with the cord fastener. 2. Replace the cover and tighten the screw. Note be sure to tighten two screws, or the unit may not work properly. Panasonic d816 digital ...
Page 124
General installation 124 installation manual 3. Tie together all of the connected cords and attach them to the wall so that the cords cannot be pulled out of the main unit. D1232 digital super hybrid system panasonic d816 digital super hybrid system.
Page 125: 2.7
General installation installation manual 125 2.7 starting the system for the first time 2.7.1 starting the system for the first time 1. Set the power switch to the "off" position. 2. Set the system clear switch to the "clear" position. 3. Plug the ac power cord into the system and an ac outlet. 4. T...
Page 126
General installation 126 installation manual kx-td1232 notice • after pressing the reset button, slide the system clear switch to the "normal" position at step 6 while the power indicator is flashing (within approximately 10 seconds). Otherwise, the system will not start up with the default values. ...
Page 127: 2.8
General installation installation manual 127 2.8 system restart 2.8.1 system restart after starting the system, if the system does not operate properly, restart the system. Before restarting the system, try the system feature again to confirm whether there definitely is a problem or not. System rest...
Page 128: 2.9
General installation 128 installation manual 2.9 system data clear 2.9.1 system data clear after storing or changing the system programming data, it is possible to clear your programming data stored in the system, if required. The system will restart with the default setting. 1. Slide the system cle...
Page 129: Section
Isdn installation installation manual 129 section 3 isdn installation.
Page 130: 3.1
Isdn installation 130 installation manual 3.1 isdn network outline 3.1.1 overview to use the isdn line service, the following unit can be installed to the kx-td816 and kx- td1232. 2-isdn u-point line unit (kx-td382) 4-isdn u-point line unit (kx-td384) 6-isdn u-point line unit (kx-td386) 4-isdn s / t...
Page 131
Isdn installation installation manual 131 how to distinguish suffix • system programming is required for card location identification. Programming guide references [109] expansion unit type features guide references module expansion the compatibility between kx-td290 and kx-td170 master system slave...
Page 132: 3.2
Isdn installation 132 installation manual 3.2 isdn line connection 3.2.1 location of the units kx-td816 one isdn line unit (kx-td382, kx-td384, kx-td386 or kx-td284) can be installed to any expansion area. Note • system programming is required for expansion unit location. Sys prg [109] > default : a...
Page 133
Isdn installation installation manual 133 kx-td1232 one isdn line unit (kx-td382, kx-td384, kx-td386 or kx-td284) or one pri isdn line unit (kx-td290) can be installed to any expansion area. Note • system programming is required for expansion unit location. Sys prg [109] > default : area 1 = 4-co li...
Page 134: 3.2.2
Isdn installation 134 installation manual 3.2.2 installation the unit step 6 is different for each unit. The kx-td1232 is illustrated as the main unit. Attention to install an isdn line unit, install the pll (phase locked loops) card (kx-td112) first. 1. Power off the system, and unplug the ac cord....
Page 135
Isdn installation installation manual 135 1. Loosen two screws on the cover plate. Insert fingers into the slits to remove the cover plate. Note any of the cover plates can be removed, as needed. 2. Connect the cabinet cord to the connector in the main unit firmly. 3. Hook the cabinet to the main un...
Page 136
Isdn installation 136 installation manual 4. Loosen the outside screw and slide the cover to the right. 5. Secure the inside screw (included) to fix the cabinet to the main unit. Note be sure to fix the inside screw to the main unit, or the unit may not work properly. Panasonic d1232 digital super h...
Page 137
Isdn installation installation manual 137 6. Insert the 8-pin modular plug into a jack on the unit. If a kx-td382, kx-td384 or kx-td386 is to be installed: panasonic 2co isdn digital super hybrid system 2 u interface jack 2 (isdn port 6) jack 1 (isdn port 5) view of tel jack (co) 4: 5: u-point to te...
Page 138
Isdn installation 138 installation manual if a kx-td284 is to be installed: a) prepare the required plugs. (rj45: plugs are not included in kx-td284.) b) insert the plug into a jack on the unit. Connect a grounding wire to the ground terminal on the kx-td284. Ra ta tb rb ← ← ← ← pin no. 3 4 5 6 ra t...
Page 139
Isdn installation installation manual 139 if a kx-td290 is to be installed (kx-td1232 only): insert the plug into a jack on the unit. Connect a grounding wire to the ground terminal on the kx-td290. 7. Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them als...
Page 140
Isdn installation 140 installation manual 10. Fix the cords to the wall as shown so that the front cover can be opened. Note if two or three expansion units are installed, cut the cabinet covers on the lower cabinets to allow the cords from the upper cabinet to go down through the cabinet covers. To...
Page 141: Section
T1 installation installation manual 141 section 4 t1 installation.
Page 142: 4.1
T1 installation 142 installation manual 4.1 t1 line outline 4.1.1 overview to use the t1 line, the following unit is required. T1 line unit (kx-td187) the unit adds 24 channels (outside line number 25 through 48 for kx-td1232). If this unit is installed, other optional cards which extend outside lin...
Page 143
T1 installation installation manual 143 • the t1 unit (kx-td187) can be installed to the only master system of the kx-td1232. • in the case of system connection, the basic or extended outside lines in the slave system cannot be used. • the capacity of outside lines is the follows. Programming guide ...
Page 144: 4.2
T1 installation 144 installation manual 4.2 t1 line installation 4.2.1 location of the unit kx-td1232 one t1 line unit (kx-td187) can be installed to any expansion area on the master system of kx-td1232. Note • system programming is required for expansion unit location. Sys prg [109] > default : are...
Page 145: 4.2.2
T1 installation installation manual 145 4.2.2 installing the unit installing one unit to the system allows 24 channels to be connect to outside lines (outside line number 25 through 48) for the master system of kx-td1232. 1. Loosen two screws on the cover plate. Insert fingers into the slits to remo...
Page 146
T1 installation 146 installation manual 3. Hook the cabinet to the main unit and slide the cabinet to the left until it is secured. 4. Loosen the outside screw and slide the cover to the right. 5. Secure the inside screw (included) to fix the cabinet to the main unit. Note be sure to fix the inside ...
Page 147
T1 installation installation manual 147 6. Insert the 8-pin modular plug into a jack on the unit. 7. Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them also. 8. Close the cabinet cover and secure the outside screw. 9. Cover the cords with the cord holder (...
Page 148
T1 installation 148 installation manual 10. Fix the cords to the wall as shown so that the front cover can be opened. Note if two or three expansion units are installed, cut the cabinet covers on the lower cabinets to allow the cords from the upper cabinet to go down through the cabinet covers. To p...
Page 149: Section
Troubleshooting installation manual 149 section 5 troubleshooting this section provides information for system and telephone troubleshooting..
Page 150: 5.1
Troubleshooting 150 installation manual 5.1 troubleshooting 5.1.1 installation problem probable cause possible solution extension does not operate. Bad printed circuit board (extension card). Exchange printed circuit board for another printed circuit board. Bad connection between the system and exte...
Page 151: 5.1.2
Troubleshooting installation manual 151 5.1.2 connection connection between the system and a proprietary telephone: can you dial an extension? The t / r is connected to the d1 / d2. Use the correct cord (inner 2 wires are for t / r and the outer 2 wires are for d1 / d2). Kx-td816 / extension kx-td12...
Page 152
Troubleshooting 152 installation manual connection between the central office and the system: t2 r1 t1 r2 can you dial out on an outside line? No outside lines are connected to the t2 / t1. Connection between the central office and the system: (continued from the previous.) reconnect the outside lin...
Page 153: 5.1.3
Troubleshooting installation manual 153 5.1.3 operation problem probable cause possible solution • when using the speakerphone mode with a proprietary telephone kx- t7130 or kx-t7030, nothing is audible. • the handset / headset selector of the kx-t7130 or kx-t7030 is set to the "headset" position. •...
Page 154: 5.1.4
Troubleshooting 154 installation manual 5.1.4 using the reset button if the system does not operate properly, use the reset button. (if master and slave systems are in operation by system connection for kx-td1232, reset both systems.) before using the reset button, try the system feature again to co...
Page 155
Troubleshooting installation manual 155 5. If the system still does not work, switch the power off. Then consult an authorized service person. When the power supply stops, certain extensions are automatically connected straight to specific analog outside lines: kx-td816 extension (t, r) of jack numb...
Page 156
Troubleshooting 156 installation manual.
Page 157: Section 6
Index 157 section 6 index.
Page 158
Index 158 numerics 2-isdn unit (kx-td382) 27 4-co line unit (kx-td180) 27 4-did line unit (kx-td185) 27 4-isdn unit (kx-td284) 27 4-isdn unit (kx-td384) 27 6-isdn unit (kx-td384) 27 8-station line unit (kx-td170) 27 8-station line unit with slt cid (kx-td171) 27 a amphenol 57je type 88 automatic rou...
Page 159
Index 159 m maximum cabling distance 47 , 48 module expansion 18 o opening front cover 43 opening the front cover 111 options 27 outside line connection 45 p paralleled telephone connection 18 , 57 pin number chart 51 pll (phase locked loops) card (kx-td112) 76 pll card (kx-td112) 28 polarity sensit...
Page 160
Psqx2576ya ka0801hk1052 panasonic consumer electronics company, division of matsushita electric corporation of america one panasonic way, secaucus, new jersey 07094 www.Panasonic.Com panasonic sales company (“psc”), division of matsushita electric of puerto rico, inc. Ave. 65 de infantería, km. 9.5,...