Saeco Cappuccino Service Manual - page 29
ROYAL
3. OPERATION
Saeco International Group
REV.4 SEPT.2003
Page 11/25
Item
Setting/Indicator
Standard
Function
System 2
ON/OFF
Steam function deactivation
Not for Roy. Prof. Redes.
1 – 500 l
3
2 – 300 l
3 – 150 l
Water hardness
4 – 80 l
Change in coffee quantity until descaling
required (1-4).
Heating plate
ON/OFF
OFF
Activate / deactivate heating plate.
Maximum
High
Medium
Low
Temperature
(Expresso lungo)
Minimum
Medium
Adjustment of coffee temperature.
Maximum
High
Medium
Low
Temperature
(Coffee)
Minimum
Medium
Adjustment of coffee temperature.
Maximum
High
Medium
Low
Temperature
(Expresso)
Minimum
Medium
Adjustment of expresso temperature.
Pre-brewing
ON
LONG
OFF
ON
Coffee is moistened before actual
brewing
(better aroma)
Pre-grinding
ON/OFF
OFF
Pre-grinds the next coffee dose.
Hot water
programme
ON/OFF
Activates or deactivates the hot water
quantity programme (see Operation)
Cappuccino
programme
ON/OFF
Activates or deactivates the cappuccino
quantity programme (see Operation)
Total coffee
Number
Indicates the number of coffees dispensed
Descale
Activate descaling programme
Scale indicator
YES/NO
Counter reset (only if descaling indicator
is activated).
Timer
0-12.45 hours
0
Machine switches to standby mode if not
used within the programmed time.
(Standby mode can also be activated at
any time via the menu buttons.)
Vending
Programming for the purposes of vending
Cleaning cycle
Not relevant in Austria
Not Roy. Cappuccino
Factory settings
Reset standard values
Not Roy. Cappuccino
Exit
Exit
Not Roy. Redesign
Exit:
Exit – Enter / ESC depending on type