Saeco Cappuccino Service Manual - page 7
ROYAL
1. INTRODUCTION
Saeco International Group
REV.4 SEPT.2003
Page 1/2
1. Documents required
The following documents and requirements are necessary to qualify for an authorised repair.
•
Service manual
•
Operating instructions where available
2. Tools
In addition to an electrical workshop, the following standard tools are necessary:
Description
Comments
1
Special screwdriver (Pozi)
Size: PZ1
1
Special screwdriver (Pozi)
Size: PZ2
1
Special screwdriver (Torx)
Size: T10
1
Temperature measuring device
Temperature range > 150ºC
Suitable for point measurements
3. Material
Description
Comments
Brand
Heat conductive paste
Temperature resistance
≥
2
00°
User's choice
Bolt adhesive
Temperature resistance
≥
200°
User's choice
Descaler
Saeco
Grease solvent
User's choice
Silicone grease (food safe)
Saeco
4. Safety instructions
All prescriptions and regulations in force regarding the repair of electrical equipment must be
observed!
The machine must be disconnected from the main power supply before performing repair work.
Switching the machine off is not an adequate measure.
The Royal coffee machine is classified under Protection Class 1. Protective devices must be tested
once the repair work has been completed.