Saeco Cappuccino Service Manual - page 37
ROYAL
3. OPERATION
Saeco International Group
REV.4 SEPT.2003
Page 19/25
5. Operation
(Royal Office)
5.1. Operating instructions
(quick reference)
Action
Comments
Display
Getting started
1
Unpack machine.
Check for damage.
2
Fill water tank
3
Fill coffee beans container.
4
Connect mains plug.
5
Turn on main switch.
Self test/
Heating
6
De-aerate water circuit.
Activate the hot water button
until water flows continuously
Heating
Heating stage (approx. 80 sec.)
Heating
Ready
Select product
Ready for
operation
Making coffee
7
Programme coffee quantity for
each selection button.
•
Coffee
•
Expresso
Depending on cup size.
Programme by keeping the
programme selection button
pressed until the desired
quantity is reached.
Programming is only possible
when quantity programme in
the user menu is ON.
Quantity
programme
8
Place cup under dispenser.
Select product
Ready for
operation
9
Elect programme and press
appropriate button.
Press once = 1 cup of coffee.
Press twice = 2 cups of coffee.
1 Coffee
2 Coffees
Hot water
15 Hot water
Press the hot water button
briefly to start hot water
dispensing; press again to stop.
Hot water
Counter reading indicator:
Indication
Command
Comments
Total coffee
Number
C
Indicates the expressos and coffees
dispensed
Not resettable
1 coffee
Total Number
C + Expresso
Indicates the expressos dispensed
Resettable (in vending menu)
2 coffees
Total Number
C + Coffee
Indicates the coffees dispensed
Resettable (in vending menu)
Total Number
C + Espr. + Coffee
Indicates the expressos and coffees
dispensed
Resettable (in vending menu)
Hot water
Total Number
C + Hot water
Indicates the hot water dispensed
Resettable (in vending menu)