Saeco Cappuccino Service Manual - page 31
ROYAL
3. OPERATION
Saeco International Group
REV.4 SEPT.2003
Page 13/25
Action
Comments
Display
17 Hot water
Quantity programme
The last programme saved is
activated by pressing the hot
water button briefly.
Hot water
Cappuccino Maker (not in Royal Digital+)
18 Cappuccino
(only when
cappuccino
maker programme
is
deactivated in the user menu)
Press the cappuccino button
briefly to start cappuccino
dispensing; press again to stop.
Cappuccino
19 Cappuccino
Quantity programme
(only when
cappuccino
maker programme
is
activated in the user menu)
Keep the cappuccino button
pressed for the desired time.
The last programme entered is
saved
Cappuccino
Quantity
programme
20 Cappuccino
Quantity programme
The last programme saved is
activated by pressing the
Cappuccino button briefly.
Cappuccino
Note:
The Steam and Cappuccino functions cannot be used parallel to the coffee programme in the
Royal Professional Rapid Steam, Royal Coffeebar and Royal Digital + systems.
Cleaning
Empty dregs drawer
Storage capacity of 30 tablespoons (dreg counter reset only if warning to
empty grounds container is triggered and machine is turned on).
Empty drip tray
As required
Clean water tank.
As required
Clean coffee bean
container.
As required
Clean the housing.
As required
Clean brewing unit and
grease filter.
1 x per month
Descale
According to indicator
Descale:
1. Place Saeco descaler into fresh water tank.
2. Fill with about one litre of hot water.
3. Remove about two to three cups via the brewing unit.
4. Activate the Descale item in the user menu by selecting OK and open the HWS valve
(place a sufficiently large container under the steam pipe). The descaler mixture is pumped
at intervals through the circuit.
5. Rinse: Fill the water tank once again and open the steam valve (about 2 cups via
brewing unit).
Reset:
Under the descale indicator item Enter - YES - Enter.