Vela 2000-0422 Installation And User Manual - page 125
Manual is about: MPEG-2 Four-Channel Serial Digital Interface (SDI) A/V Decoder System for Broadcasters
of
196
Chapter 2 — Overview and Operation
111
WRITE BUFFER
After the download is complete, the power must be cycled to restart decoder
operation with the new microcode. Alternatively, a SCSI Reset or Bus Device
Reset can be issued.
NOTES: (1) The MPEG FIFO buffer area is used during this command. No
WRITE
(6)
or
WRITE
(10) commands can be used during a microcode download sequence. (2)
Power should not be cycled during execution of the download sequence. An inopera-
tive condition may result requiring a special cable to recover microcode.