Vela 2000-0422 Installation And User Manual - page 154
140
CineCast Quad Pro Version 2.6 Installation and User Manual
Two-channel Playback Example
3
• Pre-load data for clip 1.
• (Reset Buffer 0x0021 and
Write_10 command).
4
• Issue MPEG Play Command
for immediate playback.
5
• Start sending data for clip 1.
6
• Continue sending data for
clip 1.
• Pre-load data for clip 2.
7
• Continue sending data for
clip 1.
• Issue MPEG Play command
with Pause on First Frame.
• Set pre-black set to starting
frame number.
8
• Continue sending data for
clip 1.
9
• Continue sending data for
clip 1.
• Send Resume 0x0012 with
“inline execution on Adjacent
Channel Playback End.”
Event A
10
• Send Audio/Video Channel
Select with “inline execution
of Playback End.”
• Primary = source 3 (LUN 1
output)
• Secondary = source 3 (LUN
1 output)
• Video Switch = 11b (LUN 1
output)
• Cmd = 0x003C
• Data = 0x030300C0
Event B
• Monitor Mode Page 0x30;
wait for PLAY bit to set.
11
• Last block of data for clip 1
• Monitor Mode Page 0x30,
wait for PLAY bit set.
Step
Note
LUN 0
LUN 1