Vela 2000-0422 Installation And User Manual - Request Sense
Manual is about: MPEG-2 Four-Channel Serial Digital Interface (SDI) A/V Decoder System for Broadcasters
of
196
Chapter 2 — Overview and Operation
113
REQUEST SENSE
Returns the MPEG buffer (FIFO) capacity of the decoder (see table).
REQUEST SENSE
(OpCode 0x03, 6 bytes)
The
REQUEST
SENSE
command causes the decoder to transfer detailed sense
(error) data to the initiator. The decoder maintains sense data on an individual
initiator basis, since multiple initiators can exist on the SCSI bus.
Format of command:
Bytes 0–3
Return:
Number of
64-K Blocks
LUN 0
3.5MB = (1 + 7167) × 512
7167,1BFFh
56
LUN 1
3.5MB = (1 + 7167) × 512
7167,1BFFh
56
LUN 2
3.5MB = (1 + 7167) × 512
7167,1BFFh
56
LUN 3
3.5MB = (1 + 7167) × 512
7167,1BFFh
56
Table 2-26.REQUEST SENSE Command Format