Vela 2000-0422 Installation And User Manual - page 57
Chapter 1 — Getting Started
43
Connector Pinout And Location Tables
Pin 29
Channel 3 Analog Audio Secondary Left (–)
Pin 30
Channel 3 Tally Normally Open Contact
Pin 31
GND
Pin 32
GND
Pin 33
GND
Pin 34
GND
Pin 35
Channel 4 General Purpose Input #2
Pin 36
Channel 4 General Purpose Input #1
Pin 37
Channel 4 Tally Normally Open Contact
Pin 38
Channel 3 General Purpose Input #1
Pin 39
Channel 3 General Purpose Input #2
Pin 40
Channel 3 General Purpose Output #1
Pin 41
Channel 3 General Purpose Output #2
Pin 42
Channel 3 LTC Out (+)
Pin 43
GND
Pin 44
GND
D-Sub Connector J7 (Top), “Program”
Pin
Signal
Pins 1– 15
Reserved
Note: This connector is reserved for firmware updating and CPLD program-
ming purposes and is not used in normal operation.
Table 1-8. Connector J7, Top. Reserved
D-Sub Connector J25, “Audio 3-4” (Continued)
Pin
Signal
Table 1-7. D-Sub Connector Pinout, J25 (Continued)