WEG CFW-11 User Manual - page 12
General Instructions
2
CFW-11 | 2-1
2 GENERAL INSTRUCTIONS
2.1 ABOUT THE MANUAL
This manual exposes how to install, to start-up in V/f (scalar) mode,
the main characteristics and shows how to troubleshoot the most
common problems of the CFW-11 inverter series frame size E models.
It is also possible to operate the CFW-11 in the following control modes: VVW, Sensorless Vector and Vector with
Encoder. For further details on the inverter operation with other control modes, refer to the programming manual.
ATTENTION!
The operation of this equipment requires installation instructions and detailed operation provided in
the user's manual, programming manual and manuals/guides for kits and accessories. The user's
manual and the parameters quick reference are supplied in a hard copy together with the inverter.
The user guides are also provided in a hard copy along with the kit/accessories. The other manuals
are available at www.weg.net.
A printed copy of the files available on WEG’s website can be requested at your local WEG dealer.
For information on other functions, accessories, and communication, please refer to the following manuals:
Programming manual, with a detailed description of the parameters and advanced functions of the CFW-11.
Incremental encoder interface module manual.
I/O expansion module manual.
RS-232/RS-485 serial communication manual.
CANopen slave communication manual.
Anybus-CC communication manual.
DeviceNet communication manual.
Ethercat communication manual.
Profibus DP communication manual.
Symbinet communication manual.
SoftPLC manual.