WEG CFW-11 User Manual - page 28
Other manuals for CFW-11:
Programming Manual, Installation And Operation Manual, User Manual, User Manual, Installation Manual
Manual is about: V5.8X
of
106
Installation and Connection
3
CFW-11 | 3-7
3.1.5 Installation of the Inverter with Nema1 Kit (Option, CFW11....T...ON1...) on a Wall
Fixing holes position and diameter according to the
External dimensions of the inverter with Nema1 kit according to the
Section 8.6 NEMA1 KIT on page 8-11
Fasten the inverter.
Install the Nema1 kit top on the inverter as showed in the
supplied with the product.
Figure 3.5 - Installation of the Nema1 kit top ("hat")
3.1.6 Access to the Control and Power Terminal Strips
It is necessary to remove the keypad (HMI) and the control rack cover in order to get access to the control
terminal strip (see
). In order to get access to the power terminal strip, remove the
1
2
3
Figure 3.6 - HMI and control rack cover removal