WEG CFW-11 User Manual - page 95
Option Kits and Accessories
7
7-4 | CFW-11
Table 7.1 - Accessory models
WEG Part
Number
Name
Description
Slot
Identification
Parameters
P0027 P0028
Control Accessories for Installation in the Slots 1, 2 and 3
11008162
IOA-01
IOA module: 1 voltage/current analog input (14 bits); 2 digital inputs; 2
voltage/current analog outputs (14 bits); 2 open-collector digital outputs
1
FD--
----
11008099
IOB-01
IOB module: 2 isolated analog inputs (voltage/current); 2 digital inputs; 2
isolated analog outputs (voltage/current) (the programming of the outputs is
identical as in the standard CFW-11); 2 open-collector digital outputs
1
FA--
----
11008100
ENC-01
5 to 12 Vdc incremental encoder module, 100 kHz, with an encoder signal repeater
2
--C2
----
11008101
ENC-02
5 to 12 Vdc incremental encoder module, 100 kHz
2
--C2
----
11008102
RS485-01
RS-485 serial communication module (Modbus)
3
----
CE--
11008103
RS232-01
RS-232C serial communication module (Modbus)
3
----
CC--
11008104
RS232-02
RS-232C serial communication module with DIP-switches for programming
the microcontroller FLASH memory
3
----
CC--
11008105
CAN/RS485-01 CAN and RS-485 interface module (CANopen/DeviceNet/Modbus)
3
----
CA--
11008106
CAN-01
CAN interface module (CANopen/DeviceNet)
3
----
CD--
11008911
PLC11-01
PLC module
1, 2 and 3
----
--xx
(1)(3)
Anybus-CC Accessories for Installation in the Slot 4
11008158
DEVICENET-05 DeviceNet interface module
4
----
--xx
(2)(3)
10933688
ETHERNET/IP-05 EtherNet/IP interface module
4
----
--xx
(2)(3)
11550476 MODBUSTCP-05 Modbus TCP interface module
4
----
--xx
(2)(3)
11550548
PROFINETIO-05 PROFINET IO interface module
4
----
--xx
(2)(3)
11008107
PROFDP-05
Profibus DP interface module
4
----
--xx
(2)(3)
11008161
RS485-05
RS485 (passive) interface module (Modbus)
4
----
--xx
(2)(3)
11008160
RS232-05
RS232 (passive) interface module (Modbus)
4
----
--xx
(2)(3)
Flash Memory Module for Installation in the Slot 5 – Factory Settings Included
(6)
11719952
MMF-03
FLASH memory module
5
----
--xx
(7)
Stand-alone HMI, Blank Cover, and Frame for Remote Mounted HMI
11008913
HMI-01
Stand-alone HMI
(4)
HMI
-
-
11010521
RHMIF-01
Remote HMI frame kit IP65
-
-
-
11010298
HMID-01
Blank cover for the HMI slot
HMI
-
-
10950192 HMI CAB-RS-1M 1 m serial remote keypad cable set
-
-
-
10951226 HMI CAB-RS-2M 2 m serial remote keypad cable set
-
-
-
10951223 HMI CAB-RS-3M 3 m serial remote keypad cable set
-
-
-
10951227 HMI CAB-RS-5M 5 m serial remote keypad cable set
-
-
-
10951240 HMI CAB-RS-7.5M 7.5 m serial remote keypad cable set
-
-
-
10951239 HMI CAB-RS-10M 10 m serial remote keypad cable set
-
-
-
Miscellaneous
10960842
KN1E-01
Nema1 kit for the frame size E models CFW11 0142 T 2, CFW11 0105 T 4 and
CFW11 0142 T 4 (standard for N1 option)
(5)
-
-
-
10960850
KN1E-02
Nema1 kit for the frame size E models CFW11 0180 T 2, CFW11 0211 T 2,
CFW11 0180 T 4 and CFW11 0211 T 4 (standard for N1 option)
(5)
-
-
-
10960844
PCSE-01
Kit for power cables shielding - frame E (included in the standard product)
-
-
-
10960847
CCS-01
Kit for control cables shielding (included in the standard product)
-
-
-
10960846
CONRA-01
Control rack (containing the CC11 control board)
-
-
-
11337710
KME-01
Frame size E movement kit
-
-
-
(1) Refer to the PLC module manual.
(2) Refer to the Anybus-CC communication manual.
(3) Refer to the programming manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the inverter or Null-Modem
standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(5) Refer to the
Section 8.6 NEMA1 KIT on page 8-11
for more details.
(6) Inverters with serial number below 1011361739 use MMF-01 control card.
(7) The MMF-03 module has a reserved space for the user (for example: write the application software version SoftPLC).