WEG CFW-11 User Manual - page 71
First Time Power-Up and Start-Up
5
5-2 | CFW-11
5.2 START-UP
The start-up procedure for the V/f is described in three simple steps by using the Oriented Start-up routine
and the Basic Application group.
Steps:
1. Set the password for parameter modification.
2. Execute the Oriented Start-up routine.
3. Set the parameters of the Basic Application group.
5.2.1 Password Setting in P0000
Step
Action/Result
Display Indication
1
- Monitoring mode
- Press"Menu"
(rigth soft key)
Ready
LOC
0rpm
15:45
Menu
0
rpm
0.0
A
0.0
Hz
2
- Group "00 ALL
PARAMETERS" is already
selected
- Press "Select"
Ready
LOC
0rpm
Return
15:45 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
3
- Parameter "Access to
Parameters P0000: 0" is
already selected
- Press "Select
Ready
LOC
0rpm
Return
15:45 Select
Access to Parameters
P0000: 0
Speed Reference
P0001: 90 rpm
4
- To set the password,
press the Up Arrow
until number 5 is displayed in
the keypad
Ready
LOC
0rpm
Return
15:45
Save
P0000
Access to Parameters
0
5
- When number 5 is displayed
in the keypad, press "Save"
Ready
LOC
0rpm
Return
15:45
Save
P0000
Access to Parameters
5
6
- If the setting has been
properly performed, the
keypad should display
"Access to Parameters
P0000: 5"
- Press "Return"
(left soft key)
Ready
LOC
0rpm
Return
15:45 Select
Access to Parameters
P0000: 5
Speed Reference
P0001: 90 rpm
7
- Press "Return"
Ready
LOC
0rpm
Return
15:45 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
8
- The display returns to the
Monitoring mode
Ready
LOC
0rpm
15:45
Menu
0
rpm
0.0
A
0.0
Hz
Figure 5.1 - Steps for allowing parameters modification via P0000