Yamaha M7CL StageMix V1.5 Quick Start Manual - Online With M7Cl Editor.
20
M7CL Quick Start Guide Part 3
Scene management using Studio Manager and M7CLV3 Editor.
Editing console fi les on the M7CL Editor.
Console fi les, stored to a USB storage device can be opened using M7CL editor. Open a stored session with
“File>Open” and browse for the USB storage device in “My Computer”. Only .YSE fi les are displayed until you
select Console fi les in the “Files of type;” box below the fi le name box.
The Editor can be used to change most of the scene parameter data.
Notably the Editor cannot be used for the
items in the following text boxes.
Online with M7CL Editor.
When connected via the Ethernet port and “online” the editor can control the M7CL console. Dragging the controls
with the mouse will cause the mixer parameters, the screen images and faders to change and move. Please note
that until the “RE SYNC” operation is completed the Editor and M7CL may not show the same settings. When “RE
SYNC” is performed each parameter will be copied to the other device and it is important to make the correct
decision when faced with the Re-Synchronize dialogue box;
Console->PC or PC->Console.
Managing scenes with the Editor.
The Editor session is just like the console session in that it contains 300 scenes. Scenes can be stored and recalled
from the MASTER window, and scenes can be viewed in the SCENE window just like the console.
Cannot be set by M7CL Editor.
(but still saved in .M7C .YSM or .YSE fi les)
Preferences
OUTPORT delay and level settings
MIDI setup
Wordclock
Master +48V
CUE Pop-up; PFL trim inputs, DCA trim, PFL trim
Outputs
Monitor Pop-up; (levels, source on/off, mono, link)
Oscillator (all parameters)
User Access Level
The Scene window.
File column on the left
Internal data column on the right
Cannot be set by M7CL Editor.
(and not stored in .M7C .YSM or .YSE fi les)
Network settings
Clock (day/date etc)
Passwords
Brightness controls