Yamaha M7CL StageMix V1.5 Quick Start Manual - How to Recall A Scene.
4
M7CL Quick Start Guide Part 3
To recall a scene use the up/down keys to fi nd its
number and then press RECALL. The desk will reset
itself to the chosen scene. You cannot recall “empty
scenes” with no data stored in them. If you want to
start from a fresh clean desk choose Scene 000.
Press STORE (on screen or on desk), then OK on the
confi rmation box and the scene is stored. The scene
number shows in the function access panel and the
goes out until another desk change is made.
For really fast scene storing you can disable the con-
fi rmation in SETUP Preferences. Now a simple double
press on the STORE key will store using the current
scene name. You can update the scene names later.
Clear the existing name (Initial Data) with the CLEAR key. Enter a scene name and a comment if wanted. The
scene is always given an automatic time stamp when it is created and this appears in the SCENE LIST.
How to recall a scene.
Undo Options.
If after storing or recalling a scene you realise that you
have made a mistake; perhaps you recall a scene with
all channels muted, or over-write an important scene,
there is one step of “undo”. You can access this from
the SCENE LIST pop-up. The “Undo” remains until you
next store or recall.
User defi ned keys can be programmed to do “Undo
store” or “Undo recall” functions directly.
Next press STORE and the SCENE STORE keyboard pop-up will appear. This lets you name the scene and provides
extra space for a comment or longer scene name. If you store to a location containing a previously stored scene,
this scene will be lost. (But see “Undo Options” section.) Scenes can be locked against this but generally be careful
to choose a vacant scene location to avoid over-writing a valuable scene.