Yamaha RY20 Owner's Manual - page 104
96
Modifying the Drum Kits
You can assign individual voices to a group. This function is similar to
turning polyphony off, except in this case the effect is used with
interacting voices. For example, you can use the alternate group to
create a more realistic effect with the various hi-hat voices in your kit.
1
Select the Alternate Group display page by pressing the
[PAGE+]
or
[PAGE–]
buttons. The display reads “
ALTER
” and the current group flashes.
2
Press the pad you want to modify after selecting the Pad Bank.
3
Select a group by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
You have seven groups to choose from. The range is “
OFF
” or from “
1
” to
“
7
”. Pressing the
[ +1 ]
and
[ –1 ]
buttons simultaneously resets the setting
to “
OFF
”.
You can use the
[
and
[ > ]
cursor buttons to access the “
ALTER
”,
“
DRUM KIT
” and “
PAD
” settings.
■
Alternate Group
NOTE
In a real drum set, you would never hear the sound of a closed hi-hat at the same
time as an open hi-hat. If you assign both of these instruments to one of the
available alternate groups, the closed and open hi-hat sounds will not sound
together, even if you play the pads at the same time. This means you can play the
open hi-hat, then “close” the hi-hat by playing the closed hi-hat pad.
The RY20 has individual voices for each hi-hat sound. To achieve a realistic effect,
group the three hi-hat pads together into an alternate group.
PAGE –
PAGE +
PATTERN
DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD